clutch removal on a siezed engine

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 9, 2003
Threads
70
Messages
165
Location
Breckenridge, CO
I'm in the process of swapping out my siezed f engine. The engine's out and I was going to pull the clutch out, but its not really going to work well since I can't rotate the engine. Any ideas on how to get the bolts out so i can get the clutch off?
 
That sounds like it would work but...

I need to keep the bellhousing too. I guess I'll just tear the engine down to nothing and hopefully it will spin...
 
I'll end up tearing it apart eventually anyway, so no big deal. Plus I want to get it apart and put it on my new engine this weekend. I don't feel like waiting for the UPS guy to bring me another...;)
 
Siezed engine

My FJ came with a siezed engine. Loosen the main bearing cap closest to the front of the engine first. If it was siezed from running it out of oil the main bearing cap closest to the front is probably the only one siezed.

Joe
 
Back
Top Bottom