Clutch master/slave

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2003
Threads
284
Messages
8,118
Location
Kansastitty
Can you use the older 3 speed clutch master cylinder with a 4 speed slave? I can plumb it, but are the bores compatible?

Tanks,
Ed
 
ttt
 
Ahhh, Pinhead, just the guy I was fishin' for. I couldn't come up with a reason why it wouldn't. But thought I'd ask. I have a '64-66 and a brand new OEM master and would prefer not to have to adapt anything.
I'm sure somebody here has at least tried it.
I'm thinking about changing to a 4 speed of some sorts and most of the conversions I've read about suggest using the Toyo clutch master/slave setup.
I've also heard/read that my transfercase, if original is not the one to keep.

Thanks,
Ed
 
Degnol said:
I've also heard/read that my transfercase, if original is not the one to keep.

Thanks,
Ed

Depends on what 4sp. If you are thinking of the H42, then the 4sp is probably easier and cheaper. If you are thinking of a sm420/456, you can keep it. Early cases have a RAP for being brittle, but that doesn't necessarily mean especially weak. Later ones will just stretch before they break. I know people that run them pretty hard that haven't broken them yet.
 
Back
Top Bottom