Club for sale and wanted thread
- Thread starter tblume
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I resent that remark. I am not attention . . .
. . . dang that's a nice rig . . . so who's hungry?
. . . dang that's a nice rig . . . so who's hungry?
Hehe here's some updates from my "crazy" friend.
Blown engine:
Because he was doing this: (the other truck had a 3" lift and 32" tires)
Blown engine:
Because he was doing this: (the other truck had a 3" lift and 32" tires)
Bolt on receiver hitch
Is this available? Would it bolt onto my pig?
And how much are you asking?
Is this available? Would it bolt onto my pig?
And how much are you asking?
- Thread starter
- #25
measures 44" from bolt hole CL on the sides, the three up the sides measure 2.25" and 12" from the aft most hole. holes are oval-ed out side to side measure about 3/4x1/2" about 45 & 1/2" outside to outside.
you have a trade in mind? I'm looking for anything landcruiser/camping/wheeling related, otherwise no idea what a fair price would be.
$50 bucks?
you have a trade in mind? I'm looking for anything landcruiser/camping/wheeling related, otherwise no idea what a fair price would be.
$50 bucks?
You obviously need a spork!
OK I'll measure, then I'll give you my old rusty pocket knife with the spork in trade!
measures 44" from bolt hole CL on the sides, the three up the sides measure 2.25" and 12" from the aft most hole. holes are oval-ed out side to side measure about 3/4x1/2" about 45 & 1/2" outside to outside.
you have a trade in mind? I'm looking for anything landcruiser/camping/wheeling related, otherwise no idea what a fair price would be.
OK I'll measure, then I'll give you my old rusty pocket knife with the spork in trade!
- Thread starter
- #27
ooooh , spork !!
- Joined
- Jan 8, 2006
- Threads
- 265
- Messages
- 9,822
- Location
- Ashland, OR
- Website
- www.jeffersonstatecruisers.com
That's a sweet deal... I'd take it!
- Thread starter
- #31
all yours; one of the screws busted while removing so you'll have to find one replacement- other than that it's in fine shape. I'll bring it along for the October meeting unless you want it sooner.
The meeting will be cool, thanks.
Up on the block is a set of 35x12.5 R15 BFG AT Ko's
2 are 95%+ (look new)
1 is probably 85% +
1 is about 75% and has a patch..
$500 for all four. Might consider a trade on some 33x10.5's in same or better shape. Located in Williams.
2 are 95%+ (look new)
1 is probably 85% +
1 is about 75% and has a patch..
$500 for all four. Might consider a trade on some 33x10.5's in same or better shape. Located in Williams.
Kief-
aren't you kinda parting out a 55 thats been sitting on your property?
aren't you kinda parting out a 55 thats been sitting on your property?
- Joined
- Jan 8, 2006
- Threads
- 265
- Messages
- 9,822
- Location
- Ashland, OR
- Website
- www.jeffersonstatecruisers.com
For everyone's information, there's a 55 for sale in Yreka, grey and white with a very cool sheriff decal on the door. No price is listed. Body is pretty straight, and I didn't notice any bad rust.... Let me know if interested....
For everyone's information, there's a 55 for sale in Yreka, grey and white with a very cool sheriff decal on the door. No price is listed. Body is pretty straight, and I didn't notice any bad rust.... Let me know if interested....
What year?
285/75/16 Revo's
I got a side wall cut on the way to pick up a client yesterday. I am buying four new. So, three Revos in good shape, 43k miles on them and 15-20 left to go.
Price, tequilla or good beer.
I got a side wall cut on the way to pick up a client yesterday. I am buying four new. So, three Revos in good shape, 43k miles on them and 15-20 left to go.
Price, tequilla or good beer.
Are you going with something bigger than 285's?
yes
It is pretty much scrap metal now, good glass and some misc. that people don't usually want, sheet metal on the upper half. I ebay'd all the stuff that would sell. It is a 77 BTW. Let me know what you need and I will tell you yea or nay.
It is pretty much scrap metal now, good glass and some misc. that people don't usually want, sheet metal on the upper half. I ebay'd all the stuff that would sell. It is a 77 BTW. Let me know what you need and I will tell you yea or nay.
- Joined
- Jan 8, 2006
- Threads
- 265
- Messages
- 9,822
- Location
- Ashland, OR
- Website
- www.jeffersonstatecruisers.com
I don't know... But here's a pic I snapped.... It's sitting in front of Yreka Extreme Sports (530) 842-4386 No price, or phone number, so I imagine it's an "inquire within" type thing...