CHMSL retrofit completed!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2006
Threads
103
Messages
3,952
Location
Utah
3rd brake light retrofit completed!

Installed my 3rd brake light on my 91 last night! Details below...
chmsl91.webp
 
Last edited:
Whats wrong is the location of the Logo, the color of the truck, the fact you have light guards, the fact you have a 3FE, that fact you have a stock bumper with lousy departure angle due to the hitch...etc, I could go on. :flipoff2:
 
Here's the details....I forgot to take pics while doing the install, so I ran out and took some post-install pics:

I purchased the 3rd brake light assembly (sans bracket) from a fellow Mudder for $65. Toyota wants over $400 for just the LED strip :eek: but only $25 for the bracket, so I got that from the local $tealership.

First task was to mount the light itself. Easy enough, with a temporary mount (aka duct tape) and a tape measure to find the center. I drilled holes for the bracket using self-tapping screws, then drilled a 3/8" hole to feed the two wires through the tailgate to the roof. Rubber grommet was fitted later.

n539070227_4811011_1601.jpg



I had to pull the headliner down a bit to gain access to where I fed the wires. Unlike later models, I have the really fragile headliner, so great care was taken to not poke a hole through it...

n539070227_4811012_2005.jpg



Ran the wires down the D-pillar (correct?), secured them to existing wiring, then ran through the grommet out to the USDS tail light assembly, where they were soldered to the brake light wires.

n539070227_4811013_2516.jpg



From start to finish, it took about 4 hours.
 
Last edited:
How come the top of the hatch is painted black? Was there some damage or did you weld something and just rust-oleum'd it?
 
How come the top of the hatch is painted black? Was there some damage or did you weld something and just rust-oleum'd it?

No damage, no weld. Just Rustoleum where I drilled the holes.

I'm not big about looks....Have you seen my hood lately? :hillbilly:
 
:lol:

Oh, one more thing to add:

Here in UT, it's illegal to have tint over an interior-mounted 3rd brake light. Since my windows are heavily tinted (10%), I removed a small strip to uncover the light.
 
Geez, you guys are going all Pirate on him. :rolleyes:

Installed my 3rd brake light last night!

Seriously Lka, I think that's sweet. You should create a walkthrough/FAQ on how to do it (more in depth than what you have). Having the 3rd brake light is a huge safety feature IMHO, and it sounds like you got it done pretty cheap. :cheers:
 
I think it looks cool Lane. Nice addition. Good write up for anyone that wants to do this too.
 
Geez, you guys are going all Pirate on him. :rolleyes:

Actually, I changed my first post. Wasn't quite the outcome I expected.



Seriously Lka, I think that's sweet. You should create a walkthrough/FAQ on how to do it (more in depth than what you have). Having the 3rd brake light is a huge safety feature IMHO, and it sounds like you got it done pretty cheap. :cheers:

I might do a better write-up. I know it's proven that people react faster to LEDs than to conventional bulbs... And yes, I got it done cheaply....Well, if you consider ~$100 cheap.
 
Geez, you guys are going all Pirate on him. :rolleyes:



Seriously Lka, I think that's sweet. You should create a walkthrough/FAQ on how to do it (more in depth than what you have). Having the 3rd brake light is a huge safety feature IMHO, and it sounds like you got it done pretty cheap. :cheers:

X2 He upgraded his rig with a good safety feature. It's definitely tech worthy. Hate the 3FE, not the owner.

Lane, do you happen to know how much power that assembly draws?
 
I haven't measured current with/without the light, but I can't imagine it draws very much, being LEDs.

And I love my 3FE. Keeps me from getting traffic tickets (I have a VERY heavy foot).
 
Back
Top Bottom