Chevy or 2F motor???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 12, 2005
Threads
30
Messages
117
Location
Jonesboro, GA
Website
photos.yahoo.com
Hey guys,
Been debating on what to drop in my 72. Don't want to rebuild the F motor b/c of oil problems and not too strong, from what I've heard. Read some threads on finding a 2F motor and rebuilding it but man $$$$$$$$$. Thats a sh*t load of money for a rebuilt 2F.
Then I started thinking about a Chevy 350 and transmission. Much cheaper but the process of mounting a new motor is one draw back. Let me know what you guys think. Thanks.
 
go chevy

Just bought a wrecked s-10 with a throttle body injected 4.3/700R4, drove the truck onto my trailer for $100. The wiring is a lot more simple than what I thought, and the information to get the swap done is unlimited. Fuel injected with overdrive....
 
Just bought a wrecked s-10 with a throttle body injected 4.3/700R4, drove the truck onto my trailer for $100. The wiring is a lot more simple than what I thought, and the information to get the swap done is unlimited. Fuel injected with overdrive....

How many miles were on the S-10? Did you buy the truck at a junk yard? Thanks.
 
Chances are, if you are not good at fabwork, a V8 will not be cheaper then a rebuild of your F. BTW, I have a 72 with a F and love the tractor motor..
 
Money is my main concern because I am about to graduate from college and don't want this project to take 10 years.
I hope I get some good advice below.
 
2F is simpler, and if you have the motor worked over properly, can make plenty of power. It's not balls to the wall horsepower like a 350, but a healthy 2F can hold its own, and on the trail, the torque of the 2F is killer.

I have been working on a friends TBI 350 that when it runs, it runs fabulously, except that when she shuts the engine down, then tries to restart it, it won't restart. No check engine codes. Nothing to indicate what the problem is. Been pulling my hair out on this one since we got back from moab...

My vote, get a good 2F, build that up, and drop it in.
 
Find a used 2F in good condition (typically $400 to $500 but you can spend less or more) and litterally just replace the F you have..

Cheapest route..
 
Mace said:
Find a used 2F in good condition (typically $400 to $500 but you can spend less or more) and litterally just replace the F you have..

Cheapest route..
I agree. I've been down the 350 road. I bought a runner with sm465 from a friend for $200. Man, what a deal. Except the adaptors, motor mounts, fab work, replacement parts, etc consumed another thousand and many hours of tinkering. Not for the faint-hearted and not necessarily cheaper.
 
Tigerstripe40 said:
I have been working on a friends TBI 350 that when it runs, it runs fabulously, except that when she shuts the engine down, then tries to restart it, it won't restart. No check engine codes. Nothing to indicate what the problem is. Been pulling my hair out on this one since we got back from moab...

My vote, get a good 2F, build that up, and drop it in.

Sounds like an isolated incident. Never had a problem with my 350 TBI motor.
 
Mace said:
Find a used 2F in good condition (typically $400 to $500 but you can spend less or more)
What, where, hell I'd consider getting one of those to replace my 350. :)

Have you hit up the FAQ or searched for this swap? Tons of good info on the subject. My stand is that with a 350 there are unlimited upgrades, parts are cheap and easily accessible. Everybody that hears you say you've got a V8 is like :eek: , and there is never a shortage on power.

The down side is the gas mileage but other than that I'm happy with my carbed 350.

:beer:
 
HawkDriver said:
What, where, hell I'd consider getting one of those to replace my 350. :)

Have you hit up the FAQ or searched for this swap? Tons of good info on the subject. My stand is that with a 350 there are unlimited upgrades, parts are cheap and easily accessible. Everybody that hears you say you've got a V8 is like :eek: , and there is never a shortage on power.

The down side is the gas mileage but other than that I'm happy with my carbed 350.

:beer:
Check the classifides.. I see them all the time. I was selling one in fact.

I have recieved two seperate 2F's for free as well. You just have to be open to what is out there ;)
 
fj40charles said:
Sounds like an isolated incident. Never had a problem with my 350 TBI motor.

Once we get the issues worked out, it WILL be a nice setup.

It's just getting to that point, and the fact that nobody in out little group has ever had a TBI 350 before.

I admit, it's kinda fun to work on, but then again, it's not my ride to work on monday....
 
I've turned down a free 2F engine. Lots of guys doing swaps will almost give them away if you haul them off. I know a guy who has two sitting at his house from an FJ40 and an FJ60 SBC conversion.

Based on my limited experience the SBC crowd dosen't really have an advantage on the trail. The arguments I have heard for swapping are based on fuel economy and parts availability, not rebuild vs conversion cost or performance. In my mind fuel economy is really only an issue if your rig is a DD.

The only motivation I will have to replace my 2F is to get some more driveline length in the rear. Adding a Toy Box makes the rear DL kinda short.
 
Just to let you guys know. 2F motors are scarce in the southeast. You usually have to buy a complete truck to get one. I just picked one up for $700. Supposedly rebuilt. We will see. Good luck Sebo. If you need help either way let me know.
 
I am going with a SBC in my rebuild. It was motor-less when I bought it, but had already been converted to a v-8 with a chevy tranny so it was an easy decision for me. I am with Hawk however in that the v-8 has tons of toys you can add to it at will. Mine will be carb and not FI. Don't want the hastle of wiring in a computer and figuring that whole deal out. :bounce: :bounce2:
 
I was in the same position as you are when i bought my FJ. I put the 350/SM420 all rebuilt for what i could buy the f rebuild kit for. The swap is really easy too. I say SBC all the way, for the same reasons that hawk and others have mentioned. just my .02.

This topic consistantly brings heated debates. Everyone seems top agree that cruisers are the best, but when it comes to the engine we seem to "agree to disagree".

Good luck!
 
i have to vote 350! i love my 40 with the 350 swap and mpg isnt that bad i average about 14 to 16 mpg with a 600cfm holley. dont get me wrong i love toyota quality but its just not that easy to find them around here. chevys are everywhere and you can stop at any parts place and get a fuel pump or water pump etc and it will be in stock. thats my .02 but the choice is yours.

good luck with the project!
 
Back
Top Bottom