Cheap Snorkel

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 11, 2006
Threads
117
Messages
920
Location
Central Coast California(Orcutt)
Website
www.facebook.com
Finally finished installing my cheap knock off amazon fleabay Snorkel... Template was a crap and rubber connecting hose didn't line up to well but I managed to make it work.. Eventually I think I might need to find a better rubber tube to connect to the air box "not the best angle". Has anyone found a better tube?
0814141743.webp
 
Looks nice. I used the rubber hose that came with my amazon one, works fine for me.
What hood vents are those? They look nice.
 
Looks nice. I used the rubber hose that came with my amazon one, works fine for me.
What hood vents are those? They look nice.
These are the Pontiac GTP hood louvers.
 
I cut the snorkels end so that I could use the tube
I ended up trimming the rubber tube that was supplied. The angle of the tube is what was making it a pain.
 
I bought the amazon this past April. The template was actually right on. The only issue I had with it is the spigot on the snorkle for the air filet box is too long and was tight against the opening in the inner fender. I ended up cutting an inch off of it. The rubber hose worked without issue.

Pete
 
looks good man! especially with the hood vents
 
I had to widen my holes a bit for the mounting point. That is probably why they supply huge washers fort the inside of the fender. I could not believe it came with stainless hardware. My rubber fitting between the snorkel and air box fit just fine. All and all it was worth not spending $200 more.
 
20140813_215220-picsay.webp
Just got mine on too! They only problem we ran into was that the emblem on the fender prevented the snorkel to sit flush in the rear.
 
Finally finished installing my cheap knock off amazon fleabay Snorkel... Template was a crap and rubber connecting hose didn't line up to well but I managed to make it work.. Eventually I think I might need to find a better rubber tube to connect to the air box "not the best angle". Has anyone found a better tube?View attachment 929629


I had the same issues, I just trimmed some of the rubber off and it fits fine.


...via IH8MUD app
 
I bought the amazon this past April. The template was actually right on. The only issue I had with it is the spigot on the snorkle for the air filet box is too long and was tight against the opening in the inner fender. I ended up cutting an inch off of it. The rubber hose worked without issue.

Pete

I just test fitted my template, seemed to line up perfectly too. Now I just need to find a hole saw big enough to cut the fender
 
I just test fitted my template, seemed to line up perfectly too. Now I just need to find a hole saw big enough to cut the fender

Just use your jig saw...cuts like butter.
 
Ditto that. Fine tooth blade in a jig saw did the trick for me.

On another note, this is the reason I added it:

10304798_10202814107613654_642931545689451880_n.jpg


Unfortunately, the ruts were much bigger than my tires. Hi centered as soon as I got in :lol:

Note to anyone who plays in the water. The black box under the driver's seat does not like water, and will prevent the engine from starting. It is the alarm box. There is more than enough wiring harness to relocate it under the center console. BTDT.
 
the tube going through the fender looks small in the ebay pics.
how does it compare to the name brand ones?
could there be flow restrictions?
 
Back
Top Bottom