Changing auto-door-lock defaults?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 24, 2013
Threads
87
Messages
1,155
Location
Santa Monica, CA
Is there a procedure to change the auto door lock default? Tried the standard Toyoyota "ignition on, in park, hold door unlock for 5 seconds," but nothing. Perhaps this truck only has one setting. Currently, doors lock as soon as ignition is switched on, and doesn't unlock till key is turned off. Would prefer it to lock and unlock when shifted out of and into Park.
 
Must be part of the alarm, my 97LC doesn't auto lock at all.
 
My 97 auto locks and previous had the stock alarm. Not sure if that helps. I have never heard of the other defaults for these
 
Thanks. Mine does have the factory security system, but previous owner lost the fobsprior to my ownership. I've only had the vehicle a few weeks, so haven't yet gotten to That issue. I assumed it wasn't working because the red LED in the dash blank doesn't flash. Then again, I've only ever locked the truck manually with the key.
 
nope. that's just how it works.
 
Hot damn, @WyoOtto! That's exactly what I was looking for. I actually have the factory manual for the RS3000 alarm, but it didn't occur to me that door locks was part of the alarm. Guess that makes perfect sense.
 
Mine does the same even with the aftermarket alarm but, if you start the engine from outside and then shut the door straight away, it will lock you out! :mad:

A delay of about 2 -3 seconds would be all it needs to note that at least one of the doors is open.

regards

Dave 2000
 
Back
Top Bottom