Change out starter for different year

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 21, 2005
Threads
6
Messages
42
Greetings all Cruiser-heads.

Subject vehicle - '96 Lexus LX-450
Issue ----------- Starter contacts and plunger replacement
Question -------- Possibility of swapping my 2.0 kw starter for a 2.2 kw version
Reason --------- rebuild parts will cost $100.00 (in Canada...), a starter from a '93 LC will cost $200.00

I have searched and read the forums to determine that the above is possible (swapping different year starters).

My conundrum:
- is if the 2.2 kw starter actually worth the extra $100.00 it will cost me.

Opinions? Experience?

Thanks in advance,
Amukcanuk
 
Last edited:
All three 1FZ starters are interchangeable.
 
$100 CAD sounds awfully high for a set of contacts and a plunger. Whereabouts are you?

I have a 2.2kw in my 96 (it was in there when I got it). It starts the truck quite nicely even during cold Ottawa winters. The other cold weather addition I made was a block heater. I believe it was about $45 for the heater, and it definitely makes a difference in warm up times. If there is a plug near where you park I'd probably look at this before the new starter.
 
Prove your from Canada. Tell us where you are from. You could be faking it merely to enjoy being perceived as a Canadian.
 
I live in the Toronto area. $84.80 with taxes on top of that is the quote from a local Lexus dealer. ($21.10 for each contact, $42.60 for the plunger)
The replacement is $175.00 with taxes and I give them the old starter as well.

By way of proof of Canadian residency, I offer:
Northwest Lexus is where I got the quote from, they are located in Bramladesh, I mean Brampton. Not that I in any way cast disparaging innuendos towards any particular ethnic grouping.
My political correctness should be proof, in and of itself, of my Canadian residency.
Would it help if I post en Francaise? Does it even matter?

Anyway, it looks like I'll be able to get this done more quickly by going with a complete replacement, in doing so this will necessitate the upgrade to the 2.2 kw starter. More quickly seems to be of the essence in my case as I have had this problem for a year and only recently realized the seriousness of the matter.

Thank you for your input.
 
I live in the Toronto area. $84.80 with taxes on top of that is the quote from a local Lexus dealer. ($21.10 for each contact, $42.60 for the plunger)

Just out of curiosity, try going to a Toyota dealership. The contacts/plunger will be the same part, but the price may vary if they don't think you're a fancy-pants Lexus owner ;)
 
Thanks for the tip.
I have tried going to the local Toyota dealership and always say I drive a Land Cruiser when buying parts for the Lexus. By way of example, this has saved me an over 100% markup when buying vent visors.

In my area the Lexus and Toyota dealerships are owned by the same guy and they were smart enough to have price matched between the two. Matched up for that matter...

Toronto's D-owntown T-oyota provides a decent discount but I did not have the time to go. That would also have been an hour each way while driving my insane 40, which would have cost so much in gas as to lose any savings I would have realized in parts and discount. Not that I dislike driving the thing, just that heavy city traffic in not the best environment for a rig like that and I am a most frugal minded individual.

In any case, I opted for the replacement and upgrade to the 2.2 kw unit.
I removed the thing easily enough without having to resort to universal sockets.
Having a longer handled socket handle was definitely a life saver.
Will be getting the other one today which I hope is not physically larger than the one I removed.

Wondering it torquing done the bolts to the precise amount is strictly necessary though. For those, seems to me tight is tight enough.

Cheers
 
I believe the 2.2 is slightly larger (diameter) but I had mine in and out with no real concerns. A bit of wiggling and undoing the transmission dipstick would help!
 
Back
Top Bottom