center diff lock

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

The switch you're talking about (the furthest one on the right, closest to the steering column in your pics, right?) is the diff lock switch for front and rear diff locks not the centre diff lock. It's got a different function to the switch you're after and I highly doubt you'll be able to plug it in to the existing wiring loom and have it work as you want.

The one you're after looks like the curved plugs on the other side of your steering column, right below the two side-by-side aircon vents. That's where the wiring loom plug for the CDL is, waiting to be hooked up to a switch. You must have a spare blank there? The switch you want will look exactly like the one on Slee's page ref'd earlier:

Slee - Electrical Switches

at the bottom left, the 1991-1994 Light Switch Part #: TOY1009 except it has "Center Diff Lock" written on it. The actual part number you want (without a picture) is at the top left, '93-'94 Toyota Land Cruiser CDL Switch Part #: TOY1001. The picture that's confusing you is of a '95-'97 CDL switch, the square non-curved one.
 
so youre saying that the actual swtch looks like #1009, but is actaully the part number 1001 on the slee website, cause below all the controls for the a/c there is rectangular blanks for a switch that the rectangular one would work, but it would be nice to have one easier to get to...i.e. the curved ones
 
... cause below all the controls for the a/c there is rectangular blanks for a switch ...
Not below the controls for the aircon:
... right below the two side-by-side aircon vents.
i.e. above the aircon controls. Once again, it's the curved switch you want for a '93 and it's the curved switch that will fit right in a blank in your dash and plug straight in to the wiring loom behind the dash. I'm sure it's been discussed here on ih8mud many times if you search. Here's a writeup on lcool on how to install it:

Disable ABS and Manual Centre Diff Lock

You can get the switch you're after from Slee, or cruiserdan, or your local dealer, or a wrecker, etc. I got mine from a wrecked vehicle here in Oz. It's like a 10min job to install if you've never done it before, <5min otherwise.
 
Back
Top Bottom