Center Arm rebuild conundrum

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 1, 2004
Threads
59
Messages
385
Location
The Woodlands, Texas
I have a 1969 FJ55 that the info plate in the drivers door claims was built in Feb. of 1969. I'm planning to rebuild my Center Arm with a rebuild kit from MAF or SOR and there is a distinctly different design pre and post 6/69. The problem is that a visual inspection of my Center Arm assembly looks like it is the newer style with the cone shaped innards rather than the shaft style inners with the top and bottom bolts that secure with pins. Now I know that over the course of time things change on a vehicle that old (there are plenty of non-stock items in odd places on my pig) - but it doesn't look to me like you could change from the old style to the new style Center Arm without some substantial mods to where it mounts etc. It looks like original equipment but the MAF and SOR diagrams tell me I should have the old style. Any thoughts?

Patrick
 
That would explain it. Didn't think to check the online catalog vs. my hard copy. Thanks for the closer read on the subject........

PK
 
Back
Top Bottom