CEL Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 1, 2008
Threads
84
Messages
558
Location
Burbank, CA
Hey everyone,

Im very close to buying a 94 80. The only problem is that the CEL is on. What is the worst it can be ? I know there are many different codes it can be, but cost wise, im wondering whats the worst case scenario ?

I drove the car and everything seems ok. The car had 100 k, so whats a common CEL code in this mileage range ?

From what i have researched, this car is OBD1, which means that I can diagnose the car on the spot with a paper clip ? I cannot find the tread about this.

Can someone explain to me how I can read the code or lead me to where i can find info about reading codes.




Thanks much,


Harry
 
Use the paperclip and cross the TE1 and E1 slot. Then, turn the ignition on (do not start the the car though) the light will start to blink. Count them. There will be a time lag between each blink cycle. Example....two blinks then a time lag then six blinks. This would be a code 26.


Oh yes, you will find the box located on the firewall on the passenger side. Just pop the hood and look for the little box. Pull the lid up and you will see the slots that are labled (on the lid of the box)

Good luck,
Chans
 
Chan,

Thanks for the quick reply. By cross, you mean to put one end of the paper clip into the TE1 slot and the other end in the E1 slot ?
'

Thanks


Harry
 
By cross, you mean to put one end of the paper clip into the TE1 slot and the other end in the E1 slot?

Yup.

Just make sure you take the paperclip back out when you're done.

:cheers:
 
Back
Top Bottom