Cel: 12, 25, 26

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2006
Threads
103
Messages
3,952
Location
Utah
I got more issues now...

I was driving home when my CEL came on. Got home, used the paperclip method to pull the codes (three).

What I got was 12, 25, and 26.

I've done some searching on 25 and 26, and it seems that my AFM could be dirty, or the injectors could be dirty, or the O2 sensors are bad... I have a K&N right now, so when I replace it (with OEM), I'll be doing a bit of cleaning.

Now the other one, 12, has me totally confused. Everything I've read is the same case, "my engine will crank, but it won't turn over" or "i'm not getting any spark" or things like that. But here's the kicker: It runs FINE. Turned it off, cranked it over again, and it fired right up.

:confused:

Thanks in advance
-Lane
 
Do get rid of the K&N. that is part of the problem I bet. The 25 &26 are O2's If I remeber correctly from my FJ80 days. Easy replacement. I have the same problem with my O2's. CDan gets a call today. Sorry no help on the 12
 
Do get rid of the K&N. that is part of the problem I bet. The 25 &26 are O2's If I remeber correctly from my FJ80 days. Easy replacement. I have the same problem with my O2's. CDan gets a call today. Sorry no help on the 12

I've heard O2's were expensive... How much for two?
 
Until you get your K&N, you should get rid of all the oil on it.

When I replaced the intake hose, I used a towel to wipe off around the inside of the manifold a little bit, and it was covered in oily Dust.


I think dust is a lot better than oily dust.
 
I cleared the codes, drove 30-40 miles, and so far they haven't come back. I will be replacing the K&N soon, there was a thick layer of oil in the intake tube.
 
Oily components catches the dirt particles better than dry surfaces, K&N's extra cleaning formula for more cleaning surface area.

I had a CEL 26 and a rough idle that would stall out at times... replaced both o2 sensors and so far so good with 130 miles on it. It did take about 25 miles for the ECU to relearn how things are suppose to operate though, solid 650rpm idle in drive. (Bosche 15728 Planar style o2's $135 or so) Another option would be to check the o2 sensor plugs for corrosion due to water entrapment/electrolysis.. And of course check the air intake tube between the AFM and the TB, loose connection or cracks could do it as well...
 
Oily components catches the dirt particles better than dry surfaces, K&N's extra cleaning formula for more cleaning surface area.
.......No offense, but I gotta disagree. No intentions of starting a filter war...

I had a CEL 26 and a rough idle that would stall out at times... replaced both o2 sensors and so far so good with 130 miles on it. It did take about 25 miles for the ECU to relearn how things are suppose to operate though, solid 650rpm idle in drive. (Bosche 15728 Planar style o2's $135 or so) Another option would be to check the o2 sensor plugs for corrosion due to water entrapment/electrolysis.. And of course check the air intake tube between the AFM and the TB, loose connection or cracks could do it as well...

Was it $135 for both, or each?

Intake tube checks out alright.
 
the air filter comment was sarcasm....

$135 for both but you have to cut the pigtail off of the old harness to splice them in as they are "universal 4 wire". I am not sure that they will work in a '91/'92 but they work fine in a '93/'94 but perhaps not so well in a '95-'97. (a few older threads discuss them here: https://forum.ih8mud.com/showthread.php?t=118555&highlight=15728 where I found the info)
 
the air filter comment was sarcasm....

$135 for both but you have to cut the pigtail off of the old harness to splice them in as they are "universal 4 wire". I am not sure that they will work in a '91/'92 but they work fine in a '93/'94 but perhaps not so well in a '95-'97. (a few older threads discuss them here: https://forum.ih8mud.com/showthread.php?t=118555&highlight=15728 where I found the info)

Thanks for the link...wow, all that info was a little over my head :doh:
 
Great....to add to my frustration, the alternator just up and died. Finally.....

Oh well, now I get to help feed CDan's dogs.
 
Last edited:
Back
Top Bottom