CDL placement for 96

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 5, 2003
Threads
298
Messages
3,660
Location
Saratoga Lake, NY
I'm ready to install a CDL I bought in July. Where did you guys with 95-97's install it on the dash?
 
I like to have my hazard light switch on the top left next to the steering column so I can hit it without looking when highway traffic comes to an emergency stop (I don't want those behind me plowing into me when they don't know I'm stopping and not just slowing down).

I put mine in the top center location, but I'm considering moving it to the lower row of switches (where I currently have only the rear heat and the rear defrost) b/c I'm afraid I could inadvertantly hit the CDL in a panic stop while trying to hit the hazards. Not likely to happen, but I don't think it would be good if it did.

just my 0.02.
 
Top left? you mean by the hi/low fan control?
 
I like to have my hazard light switch on the top left next to the steering column so I can hit it without looking when highway traffic comes to an emergency stop (I don't want those behind me plowing into me when they don't know I'm stopping and not just slowing down).

I put mine in the top center location, but I'm considering moving it to the lower row of switches (where I currently have only the rear heat and the rear defrost) b/c I'm afraid I could inadvertantly hit the CDL in a panic stop while trying to hit the hazards. Not likely to happen, but I don't think it would be good if it did.

just my 0.02.

Miescha,
I like the idea of having the diff lock switch on the top row, but yes you have to move a switch. I guess there is enough wire length to move these switches around then? I wonder can you move the antenna switch, or the defrost switch down to the bottom row???
 
I think he means the usualy blank cutout directly left of where the emergency flasher and rear defrost switchs are located on a stock 95-97.
 
Hmm, that is where the Toyota alarm thingy is. Guess I can remove that tho.
 
And another question, I only have time to install the switch and I'll do the 7 pin mod in a few days. What can I expect when I hit the switch before I do the 7 pin?
 
Thanks Rick. We talked about that during our liquid dinner a while back.
We need to do that again!
You know the ice is comming my way. Then to you!
Just installed Satellite radio, so I'm thinking I can move the antenna switch down to the last row.
 
ok, just let me know! Probably should hold off a week or so. Colorado gets snow, we get ice!
 
Here is my dash (please excuse the dust). I don't remember how it started from the factory, but I know I moved things around and plan to move the CDL to the bottom row (as others have stated, to avoid "touchy" fingers).

I left the alarm 'button' in place even though I've replaced the factory alarm with an aftermarket clifford with remote start.
Dash.webp
 
top row,

alarm, CDl, Haz, rear defrost

bottom row

blank, rear heat, antenna switch

not the most ergonomic arrangement but did not disturb any of the harnesses.

I want to re-arrange it to get the alarm to a more visible spot, right now you cannot see the LED from the drivers winow.
 
Raventai, are you still using the OEM alarm and key fob? If not how can one get that red led to blink if your not using the original system? I would love to get that thing to at least look like it works when I lock up. I have switched to a car starter/ door lock system.
 
Here is my dash (please excuse the dust). I don't remember how it started from the factory, but I know I moved things around and plan to move the CDL to the bottom row (as others have stated, to avoid "touchy" fingers).

I left the alarm 'button' in place even though I've replaced the factory alarm with an aftermarket clifford with remote start.

Miescha, thanks for the pic. You moved the defroster switch. I'll do that. A great idea! Who needs to see behind anyway!
 
Raventai, are you still using the OEM alarm and key fob? If not how can one get that red led to blink if your not using the original system? I would love to get that thing to at least look like it works when I lock up. I have switched to a car starter/ door lock system.


I still have and use the RS3000 alarm and fob that the Lx450 came with.


There are little modules you can buy that blink on their own, kind of a fake alarm.


If you wanted to build your own you need a timer, an LED a switch and a resistor, you could probably build it all out of radio shack.

With the above you would need to hit a switch manually as you got out, to get it to work automatically the remote entry system you are using would need to have an output to drive it.
 
Back
Top Bottom