Cat Convertor

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 25, 2013
Threads
4
Messages
8
I have a 94 Cruiser. The Cat is about shot, any ideas what the cheapest and logical way to go about replacing it? Thanks!
 
Don’t delete the cats just because yours are shot and you live in an emissions free state. The 1fz is designed to have cats and the computer will throw an 02 sensor code resulting in bad performance.

Catalytic converters are fairly cheap and easy to replace. My factory cats started rattling earlier this year so I replaced both of them with a single magnaflow cat and doesn’t throw a code. You do have to be careful on your 02 sensor placement with a single cat so it won’t throw a code. A modern single cat today does just as good (if not better) than both of the OEM cats do with 1990s tech.
 
Don’t delete the cats just because yours are shot and you live in an emissions free state. The 1fz is designed to have cats and the computer will throw an 02 sensor code resulting in bad performance.

Catalytic converters are fairly cheap and easy to replace. My factory cats started rattling earlier this year so I replaced both of them with a single magnaflow cat and doesn’t throw a code. You do have to be careful on your 02 sensor placement with a single cat so it won’t throw a code. A modern single cat today does just as good (if not better) than both of the OEM cats do with 1990s tech.

I think the 02 sensors are all before the cats on a 94/ OBD I rig.
 
I went with Magnaflow a little over a year ago. I like the sound, I liked the price, but wow does the metal not last nearly as long as factory Toyota does. I need to change the #1 oxygen sensor right now and I'm worried about whether it will even be possible to get the sensor off without breaking the stud, it's that rusted. For comparison, the Bosal system behind it (that went on at the same time) looks great.

To Magnaflow's credit, they did say they would warranty it if that happens -- although the catch is that they will refuse the return (and scrap the system, without warning) if there's no RMA, and the RMA has to come from where I bought it. I bought it through Amazon, so I'm thinking getting them to request an RMA is going to be a real laff riot.

They emphasized it needs to be installed with anti-seize on the studs, so if you go with the maggie, make sure you do that.
 
If you only have one O2 sensor before the cats then just delete them. How to would be to pay a local place $100 to delete them for you.
 
delete them..but get ready for some stinky exhaust..perhaps some complaints from wives/passengers and people behind you if in an off road situation. NO CEL as 02 sensors are before cats..and while your at it move them..Remove the PAIR and put them in the header, no extending wires just rerouting
 
Don’t delete the cats just because yours are shot and you live in an emissions free state. The 1fz is designed to have cats and the computer will throw an 02 sensor code resulting in bad performance.

Catalytic converters are fairly cheap and easy to replace. My factory cats started rattling earlier this year so I replaced both of them with a single magnaflow cat and doesn’t throw a code. You do have to be careful on your 02 sensor placement with a single cat so it won’t throw a code. A modern single cat today does just as good (if not better) than both of the OEM cats do with 1990s tech.

What magna flow was it and how much work was involved?
 
Don’t delete the cats just because yours are shot and you live in an emissions free state. The 1fz is designed to have cats and the computer will throw an 02 sensor code resulting in bad performance.

that's true in 95-97 as they are obd II and there are post cat o2 sensors to monitor the cat efficiency. he has a 94 which is obd I and only has pre cat o2 sensors for fuel trim only, there is no cat monitoring in obd I.

either straight pipe it or just get a magnaflow or walker and have it welded in
 
Back
Top Bottom