Carputer, not happening

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 23, 2007
Threads
114
Messages
1,115
Location
Kennett Square, PA
Website
cruisin4parts.com
I've always wanted to put a mac mini into my 80, but after looking at the components, the circumstances, I don't think I'm going to go through with it.
I bought:
CarNetix P1900 with MacMini Adapter
Griffin PowerMate Volume Controller Knob
(some where in FedEx land) Xenarc 700 TSV

I want to hook up a mac mini to it, too.

Then I thought:
I really can't use the computer when off roading,
its a lot of work to wire stuff in right,
I have to buy an amplifier and wire that to the speakers,
and if I go into water, there goes the mini!

So, I think I'm going to sell this hardware unless you guys think I can pull it off. I think it was bad idea buying this junk in the first place.:mad:

I think I'm going to go with just a single din head unit with an aux input for the ipod and make a dock for it. :bounce:

What do you think? Work has been slow lately and I haven't been reaping in a lot dough to pay for all this stuff. I don't want to sell it on ebay because of paypal and dumb fee's.
 
You can use the computer all the time, even off roading. One would think that hard drives were susceptible to shock damage. Just not true. All hard drives survive up to 55Gs (laptop drives up to 70Gs). It turns out they are far more susceptible to vibration death than shock death in a car. My hard drive has run with no problems for two years and I off road hard. Probably the hardest thing on a hard drive is hitting pot holes at speed and that is most of the off roading I do.

Yes, a computer sound system takes a LOT of work. But it is well worth it for the reward you get. I have 40 gigs of mp3s and Flac at my finger tips. Every album I have ever purchased is available to me at the touch of a button or two. I love it.

A link to my buildup.
http://www.mp3car.com/vbulletin/show-off-your-project/72552-mp3-project-land-cruiser-done.html
Audio01.webp
Menu.webp
Temps.webp
 
Last edited:
I'm also working on a carputer project for mp3's, GPS, and other goodies. I don't have cool gear like you but for what I have, i think it will work. I'm using a dell SX270, 8 inch lilliput screen. The only problem I'm running into is where to mount the pc. I was thinking under the seat but it's too big to fit under there. So I think I'll mount it in the back somewhere. with the mac mini, can't you mount it in the glove box?
 
I was thinking about installing a tower I have laying around for WiFi and GPS just for sh*ts and giggles.

All I really need is a Lilliput touchscreen and perhaps a bluetooth keyboard/mouse setup.

Might even do it this weekend... :D

As far as getting the Mini wet, just mount it in the glovebox or something. If water gets that high you're gonna b0rk more stuff than just the Mac anyway.

I still think a carputer would be worth it, go for it and post your results.
 
EricE,
I removed the bezel today and its there's so little space back there behind the radio. Slim pickens for mounting the display for sure. The thing is I can't make a custom mount like you did. I have access to metal and some aluminum, but I'm better at bigger stuff than the small fine things.
I see how you used the stock radio mounts to mount your mount.

The main hard part for me is getting the sound from the Mac Mini to the speakers.

Edit: Yeah, I guess the glove box would be wet safe.

Its just so much money! I'm too used to making everything myself and not spending more than a Sunday afternoon.
 
EricE,
The main hard part for me is getting the sound from the Mac Mini to the speakers.
Yeah. You see I went with the alpine H701 to solve that. I use the SPDIF out from the computer and translate it to optical for the H701. So that acts as the crossover and sends preamp outs to the amps. It also provides an up-front volume knob for the system.
 
Last edited:
The main hard part for me is getting the sound from the Mac Mini to the speakers.
Hmmm... just get a decent 4-channel amp (like 50w x 4 RMS) and use that.

I still think its worth doing, especially if you have the majority of the parts already.
 
LOL. Nope, it is still working with no issues. I have always been more of a function over form guy. As long as it works well then I am happy. My rig is no show truck. :)
Ha, no problem there.. lol

Just make a decorative cover with a picture of a clean install on it :flipoff2:

Just messin with ya, under the hood my Cruiser looks like its got 4 generations of rats living in there.

:cheers:
 
Yeah. You see I went with the alpine H701 to solve that. I use the SPDIF out from the computer and translate it to optical for the H701. So that acts as the crossover and sends preamp outs to the amps.

I was thinking that. Try to get some simple head unit to send a line to. Stow it away with the mac mini, all it has to do is route the sound the amp. I'm not looking to replace the speakers yet, but when I do, then I could wire to an amp and then the speakers.

But for now, I want to try to use the stock amp. With the head unit I could probably utilize it.

With the mac mini, I have to use a 2.5mm jack for the audio out, so I would have to get one of those adapters, that will bring it over to the dual RCA's, or however the radio wants it.

You think I could get away with using the stock amp? I guess as long as the new headunit fits, right?
 
Ha, no problem there.. lol

Just make a decorative cover with a picture of a clean install on it :flipoff2:

Just messin with ya, under the hood my Cruiser looks like its got 4 generations of rats living in there.

:cheers:

Mine looks worse. I could sell grease for a living.
 
Did you purchase the Xenarc online? I am in the Orange/Riverside Counties area and I am looking for a store that stocks either the Lilliput or Xenarc vga monitors and other carputer type equipment. It does not seem like the local Fry's has this kind of stuff.

I think a carputer is the best option available for seamless integration of MP3, GPS, ODB-II, rearview camera, DVD, wireless internet, etc. etc. etc.
 
I was thinking that. Try to get some simple head unit to send a line to. Stow it away with the mac mini, all it has to do is route the sound the amp. I'm not looking to replace the speakers yet, but when I do, then I could wire to an amp and then the speakers.

But for now, I want to try to use the stock amp. With the head unit I could probably utilize it.

With the mac mini, I have to use a 2.5mm jack for the audio out, so I would have to get one of those adapters, that will bring it over to the dual RCA's, or however the radio wants it.

You think I could get away with using the stock amp? I guess as long as the new headunit fits, right?
I think you should either sit on the hardware until you can afford to do the install or maybe start with something simple now and expand when you have the $. You could use the speaker outs from the computer to high level inputs on an amp to run two up front speakers for a simple install now and then expand later with an external crossover and more amps/speakers. Or maybe you can convert speaker outs from a computer to RCA outs (I don't know this stuff well) You only need sound up front anyway. Do you have a startup/shutdown controller yet?
 
Last edited:
Did you purchase the Xenarc online? I am in the Orange/Riverside Counties area and I am looking for a store that stocks either the Lilliput or Xenarc vga monitors and other carputer type equipment. It does not seem like the local Fry's has this kind of stuff.

I think a carputer is the best option available for seamless integration of MP3, GPS, ODB-II, rearview camera, DVD, wireless internet, etc. etc. etc.
Just a note that a standard Xenarc or Lili will work fine but you will LOVE a transreflective Liliput from mp3car.com. It is $ but it is totally worth it. I started with a lili and it was fine. Fine but completely unreadable in a variety of odd lighting conditions. The Transreflective solves that for 90% of the problems. Also, you wont find these 7" LCDs in any local store. The market is just not there yet.
 
Last edited:
I think you should either sit on the hardware until you can afford to do the install or maybe start with something simple now and expand when you have the $. You could use the speaker outs from the computer to high level inputs on an amp to run two up front speakers for a simple install now and then expand later with an external crossover and more amps/speakers. You only need sound up front anyway. Do you have a startup/shutdown controller yet?
Yeah, the carnetix p1900 does it. Sleeps the Mac Mini when you turn the cruiser off.
Turns on with ignition, or even unlocked doors! (somehow gotta find the door lock 12V line).

Good controller. Lots of wiring!
Site:
http://www.carnetix.com/CNXP1900.htm
Installation Diagram (says P2140 but its the same stuff):
http://www.carnetix.com/p1900/Applications/Mac-mini/mm-p5v-macpac.jpg

It hooks right into the mac mini with the stock magnet plug, its pretty cool.

I mean, if I can get the sound to the speakers, I'd be set. I might just try to get a head unit in there. Can't think any thing else. High level inputs?

EDIT: also have to buy another mac mini. I can put mine in there for now, but I'd like to have a permanent one in there I can get mud on.
 
For getting the sound from the computer to the AMP I think you'll just take the speaker out from the computer (the mini jack) and convert it to RCAs and run that to your amp. That *should* work though I am no expert.

[high level inputs on an amp take speaker wires from a HU (like a stock deck) and amplify that signal. They work when your HU doesn't put out RCAs. Not the best option but sometimes it is all you have.]
 
For all your computer car needs I would advise you to head over to mp3car.com forum, create an account and ask some questions. The people there are very knowledgable though they can be hard on newbie questions at times. A search there will reveal the answer to any question you could ever think of asking. And if not, you will get an answer if you ask.
 
Last edited:
Back
Top Bottom