Carb Spring ???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 10, 2005
Threads
119
Messages
2,452
Location
Calgary, Alberta
IMG_3745[1].webp
Am I missing a spring on my throttle?

When I take my foot off the peddle it stays revving at a fast idle but I can knock it down to a regular idle by lifting the peddle up the last tiny bit.

It seems like a spring is missing on the carb. Maybe one that goes from the tab with the hole in the center of the pic over to another tab on the left (you can just the see edhe of the left tab beside and under the rod that comes up from the bottom of the pic.
 
Yes, it is missing a return spring that goes between carb throttle arm and throttle bracket.

That being said, if everything is free then the return spring in the pedal & the AP return spring inside the carb should be enough to close the throttle. The linkage could probably use some oil at all the pivot points, and the carb throttle shafts might be gunked up (looks gunky in pics).
 
Thank Jim and Pinhead.

Do either of you happen to know the size of the size/length of the spring off the top of your head?
 
I have been searching for a replacement as well
 
Shoot mine looks like a previous owner threw an extra spring on the return. Cable just snapped and was in bad shape. It's a wonder she held together as long as she did.
 
Back
Top Bottom