Can't engage rear locker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2006
Threads
104
Messages
573
Location
North Jersey
I retrofitted my 80 with a OEM locker this past spring and everything worked properly until this weekend when I tried to exercise them on a dirt road. I locked my CDL and then engaged the the rear locker and I never heard the ECU locker click. I tried again and no noise from the ECU. What would be the first place to start looking?

Thanks
George
 
Power to the actuator then stuck actuator.
I did not check for voltage at the locker I was kind of lazy this weekend. Another reason I didn't check the actuator for voltage is I assumed no voltage would be present at the actuator if the ECU relay was not engaging thus supplying voltage the actuator.
 
I looked into it more today. No water in the actuator, no voltage either, and no voltage at the connection plug behind the DS kick panel. I get the flashing rear diff light on the dash. I'm thinking its either the locker ECU or the actuator position switch. Any ideas?
 
Magnet came unglued from motor housing and got stuck against the armature. Someone before me applied blunt force trauma to the motor cover with a tool probably trying to remove it from the 3rd exact spot where magnet came off. All fixed with JB Weld and with RavenTai's writeup completely cleaned and re-lubed the entire actuator. Engages a lot quicker now, Thanx Raven.
 
Back
Top Bottom