canoe support?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 27, 2005
Threads
183
Messages
471
Location
San Jose CA
I'd like to run a cross bar above the roll bar for tying down a canoe. Anyone know of a bracket that would hold a crossbar to the roll bar at right angles? My windshield is higher than the roll bar...

I don't want to weld, and want to have it removable
 
go to a local hardware store see what they have for a u bolt type fastener, or a long hose clamp. like 6 inch.and a piece of 1/2 or 3/4 pipe...

^x2^

U-bolt, sized to fit the roll bar.

Drill two holes in each end of your smaller crossbar and thread the u-bolts thru the holes.

Add lock washers and nuts and snug it down.

I would double-nut each threaded end.
 
Back
Top Bottom