bye bye charcoal canister

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2003
Threads
96
Messages
691
Location
atlanta
So I 86'd my charcoal cannister on my 4/79 FJ40.

So I am left with a line that comes from the top of the carb and a line that comes from the tank. Any reason I can't just connect these two lines vs capping each. I know the tank line is a breather expansion line I am not sure what the carb line did.

If I did this it would seem that the tank would just breath out of the top of the carb.

ALF
 
Why did you remove the charcoal cannister?
 
Mace said:
Why did you remove the charcoal cannister?

x2. I understand the space issues with the 79, but you could still integrate one from an older cruiser and reap the benefits.

1. You NEED to vent your tank. Unvented tanks create pressure when you don't need it, and create vacuum when you don't need it. Atmospheric venting wastes fuel.

2. A properly routed charcoal canister will condense heavier vapors into droplets and return them to the tank, while sending on the lighter vapors into the intake system via the air cleaner, VSV or air horn [depending on year] to be burned.

My .02
 
65swb45 said:
x2. I understand the space issues with the 79, but you could still integrate one from an older cruiser and reap the benefits.

1. You NEED to vent your tank. Unvented tanks create pressure when you don't need it, and create vacuum when you don't need it. Atmospheric venting wastes fuel.

2. A properly routed charcoal canister will condense heavier vapors into droplets and return them to the tank, while sending on the lighter vapors into the intake system via the air cleaner, VSV or air horn [depending on year] to be burned.

My .02
X3 (Thus my original question). Plus, keeping the evap emissions system (including the canister) intact will keep me from :rolleyes: when I read the inevitable post asking about (or suggesting) poking a hole in the gas cap to vent the tank to the rest of the world.
 
Guys, cannister is gone I have already made this jump.

How would a pre emmisions junked up tank be plummed to account for gas tank venting.

If it vents to the carb the at least I will burn some of the fumes :0

Thanks.
 
Back
Top Bottom