Buying, Selling & Trading

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Pulled these out over a decade ago from either my 98 or 03 100. Can’t remember which one. Sold one set years ago and this set is still around. Tired of storing them. Case of beer and there yours. Otherwise getting scrapped.
52A22D32-5842-4144-ABF5-CC2120C821E1.webp


Have an 80 with a worn leather shifter? This is a rubber one from a cloth interior 80. Another case of beer item.
BB6E35E2-CA87-48EF-9FB1-0489062A9C3C.webp
 
Last edited:
@Bowser Yeah, third row. Gray is better than tan, but i need two and two different colors wouldn't be the end of the world. Retrofitting some seats in my 40. I can pull them if you wanna let me loose in your parts pile. :hillbilly:
 
@Bowser Yeah, third row. Gray is better than tan, but i need two and two different colors wouldn't be the end of the world. Retrofitting some seats in my 40. I can pull them if you wanna let me loose in your parts pile. :hillbilly:
If your just looking for belts I have bins full of different ones from 80s and 60s in all colors they offered. I occasionally use them to web outdoor seats. One of the way to many things I do. So I’m sure you can find a left and right pair matching in gray. Already pulled and In bins. Just need to dump and sort them when you pic them up. Two cases of beer?

Both houses and shops survived without any water last week. My 1000sqft storage building however got wet. So clearing out crap as I don’t need all of it. Scrapped almost 10k in weight of 60 and 80 parts last week.
 
Scrapped almost 10k in weight of 60 and 80 parts last week.

is scrap a little better than a few months ago when it was about a penny a pound?
it was hardly worth the effort then
 
Definitely wasn’t about money. Effort yes was large. But a bunch of flooded out parts I didn’t need to keep hoarding. Good excuse to clean up. Lots of engine/trans/t case combos I don’t need. Plus tons of sheet metal. It always looks valuable but when I don’t actually try and sell it or want to. Pacific pays. Very little. But consistent. Got enough to cover one lunch and afternoon murray bar tab.
 
I have a 1991 FJ80 3FE engine with 370xxx miles that I'm currently in possession of as I bought it off a guy doing an LS swap. I bought it for the head/intake/exhaust and several accessories for a 2FE project down the road. I'd like to offload the rest of the engine and several accessories.

Basically anything south of the head/block parting line I have and would like to get rid of. Block, crank, pistons, alternator looks new, power steering pump, engine mounts, water pump looks new, pulleys, ac pump, heater lines, power steering lines, starter, oil cooler, oil pan, and some fuel lines and other bits.

Any and all of it can be yours for the low low price of a 6 pack.

67676913590__A4646C97-B71E-4153-A835-3086604B4F1D.webp
 
I have a 1991 FJ80 3FE engine with 370xxx miles that I'm currently in possession of as I bought it off a guy doing an LS swap. I bought it for the head/intake/exhaust and several accessories for a 2FE project down the road. I'd like to offload the rest of the engine and several accessories.

Basically anything south of the head/block parting line I have and would like to get rid of. Block, crank, pistons, alternator looks new, power steering pump, engine mounts, water pump looks new, pulleys, ac pump, heater lines, power steering lines, starter, oil cooler, oil pan, and some fuel lines and other bits.

Any and all of it can be yours for the low low price of a 6 pack.

View attachment 3043036

I was looking at the belt routing thinking something is wrong, then finally realized there is no smog pump.
I could take that stuff off your hands but it's not like I need more parts on my shelf, I'd just take the block also.
If someone else needs them more than me, that is just fine.
 
I've got a stock roof rack with 4 cross bars for a 100 if anyone needs them.

It's off 2002 land cruiser with two mounts on each side. Two of them are original crossbars and the other two I got off craigslist , I think they are installed wrong into the mounts ,as they have a bit of a shape to them to help with wind noise .

Anyways, pay for shipping or pickup for free. Will see if anyone here needs them before posting up elsewhere
 
Last edited:
Hi All,

I'm looking for either 1 or 2 OEM Cross bars for a factory 2015, 200 Series Land Cruiser. Free is always nice, however everything has a price so happy to pay fair price. Please let me know! Thank you!
 
Hi All,

I'm looking for either 1 or 2 OEM Cross bars for a factory 2015, 200 Series Land Cruiser. Free is always nice, however everything has a price so happy to pay fair price. Please let me know! Thank you!
I doubt it but are the mounts anything like the 100 series cross bars I just mentioned?
 
I doubt it but are the mounts anything like the 100 series cross bars I just mentioned?
From what I recall they are very similar...I'm unsure of the specs and would need to see a pic to have a better understanding. I'll also be back in town on Thursday night/Friday morning before heading out camping for the weekend....
 
From what I recall they are very similar...I'm unsure of the specs and would need to see a pic to have a better understanding. I'll also be back in town on Thursday night/Friday morning before heading out camping for the weekend....
K. I can't imagine they will work but if you learn otherwise I have some spares
 
This winch came on a truck I bought, but it is surplus to my needs. As far as I can tell it’s never been used.

-It’s a WARN Zeon 10s Platinum
-Located in Bozeman
-$1,800 OBO

I just had the WARN service center (Montana Jack’s) in Great Falls put in a new control module ($400) and I purchased a brand new wireless remote ($225) for it.

The winch retails for $2,200.

WARN Spydura synthetic rope ($400 retail) goes with the winch, if you want it.

Let me know if you have any questions.

14413C4E-442E-4487-B0C2-DF7910BDF192.jpeg


F93BE326-FB05-4C0C-AF27-46F6AC8C9B85.jpeg


C29CF9A3-BA19-49B7-9029-8901F79CD3B5.jpeg


94EAF1FF-24E0-4CFB-AE09-4E364EC487E6.jpeg


1695F920-95B8-42B4-B575-E35746BA4A91.webp
 
Last edited:
I've got 2, 100 series damage multipliers 1 from a 2000 and 1 from a 2003
any interest
$50 each
first 2 pics are the 2000
second 2 pics are the 2003
2003 has the right mount bent

DSCF4629.webp


DSCF4630.webp


DSCF4631.webp


DSCF4632.webp
 
Looking like I'll be needing to swap my 95 Land Cruiser for something that can pull a horse trailer. Not quite ready to sell it yet, but thought I'd see if there was any local interest before I put it on the market. Message me directly if you or someone you know might be interested. Otherwise, I'll share a link here when it's posted out.
IMG-0049.webp
 
Back
Top Bottom