Bumper carriage bolts

[ginmtb]

Anyone know a good source for these? I only need the carriage bolts don't need the others. I read on a post that they are 10mm x 1.25 pitch thread x 25mm. Seems like I can only track down 1.5 pitch thread in those dimensions.

 

[PWCO70crusier]

you can get them from ccot
http://coolfj40.stores.yahoo.net/bumperbolts.html

 

[Ambrew]

I bough the ccot kit, and it's nice. no regrets.

 

[Fast Eddy]

They're probably available from Toyota. Ask Beno.

 

[Living in the Past]

They're probably available from Toyota. Ask Beno.

X2 if your looking to stay original buy original if available. If not I've bought FJ40s that had SAE carriage bolts used on the front bumper.

 

[ginmtb]

you can get them from ccot
http://coolfj40.stores.yahoo.net/bumperbolts.html

Thanks I saw that just don't need the other bolts was hoping a local source might have them. I can get the 1.5 thread pitch I guess it doesn't really matter that much since they require a nut anyhow (vs. the fixed in place nut).

 

[OGBeno]

They're probably available from Toyota. Ask Beno.

Yes still available.

 

[sggoat]

you might try Bolt-Depot, but I couldn't get 1.25 thread pitch in anything larger than M8 in stainless(they have the grade 8 bolts and JIS)
The rep sent me a link for some bolt places that would have them, but it somehow has disappeared from my inbox.

 

[Fast Eddy]

Why Bolt-Depot if you could get the original ones from Toyota???

 

[Alstruck]

I bought a set from sor.com

 

[ginmtb]

Well I guess I don't need carriage bolts... All the holes are round... Wtf? Guess I'll be drilling the remaining ones out too since they just spin...

Thanks all for your responses sorry for the wasted bandwidth.

 

[antFJ]

Should be able to punch them out? The nut isn't welded on the back

 

[ginmtb]

Can't punch them out since the top is so big and the nut is bigger than the bolt hole. Fortunately when I bought it only two bolts are in place.

Bummer too I like the look of the rounded top... But I don't think there is any way to tighten up the nuts fully without the square hole.