building sliders

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 18, 2006
Threads
137
Messages
992
Location
hillbilly desert rat
so guys i am going to get a bud with metal skills to build me a set of sliders .I am providing the grunt labor and steel .. my question is what size tubing is recommended .. square or round tubing ... what size plates to attach it to the truck ... weld on or bolt on i would like to hear pro's and con's on this issue .. thank for the input

d...
also
this mod comes from me crushing a rocker panel out in a arroyyo ..

i want to post pics i have already uploaded to this post how is that done ??
 
so guys i am going to get a bud with metal skills to build me a set of sliders .I am providing the grunt labor and steel .. my question is what size tubing is recommended .. square or round tubing ... what size plates to attach it to the truck ... weld on or bolt on i would like to hear pro's and con's on this issue .. thank for the input

d...
also
this mod comes from me crushing a rocker panel out in a arroyyo ..

i want to post pics i have already uploaded to this post how is that done ??


1/4" plate for mounting plates and gussetts
.120 wall for all steel tubing, round or square

weld on or bolt on is a personal preferance.

i use round tubing for my outriggers.
 
Check out the Slider FAQ, there are alot of links to people that have done their own.

I used 2x2x1/4" square for the outriggers, 3/16 plate for the mounts, and bracing to outrigger, and didn't use u-bolts, I used grade 8 bolts, put angle on the plates to help assembly and keep the plates from moving, and on the backing plates I put a rib to keep them from bending when tightening the bolts.

The other thing I did was the outriggers are level vetically. I think Georges dwgs (you'll find them on the FAQ I believe) has angles not only for the frame coming in and out but the riggers go down from the frame. This is to get better clearance - I cheated and I just notched the top to clear the pinch weld. Loose a little strength in that point, but since it's 1/4" tube rather than 3/16 plate bent into a 'U' shape as some other designs, it's still stronger than those.

Around the cat I got more creative, but don't have any pictures of that part yet...

https://forum.ih8mud.com/showthread.php?t=107306

https://forum.ih8mud.com/showthread.php?t=111416
 
Last edited:
I built mine using george's plans.
If I were to do it again I would not use ubolts but rather do what WalkingEagle recommended.
 
Back
Top Bottom