Build date vs. EPA date

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Your vehicle is very unusual and it's a pitty that you have changed the color. This is not the first time but it is only the second and possibly the third I have seen in the past ~30 years that was labeled other than what the "official" documents say.

My other clear memory is of a 1979 4WD truck (offically introduced in January of 1979 and starting production listed as 1-79). This truck was a black RN47. Black was very rare and was only applied to short bed (RN37) trucks. This truck was a factory black RN47 (long bed) with a tag that showed a 12-78 production date.

Well, if it helps it was the PO that painted it (BKFJ40), but I gotta admit I like the dune beige over the dark green. It also has lockers and cloth seats. Interesting info though, sounds like it's one of the first few hundred of the 95's. Is it possible they were running both 94's and 95's at approx the same time on the line?

Does your info show any 12/94 1995 models being produced, or are they all 1/95?
 
Well, if it helps it was the PO that painted it (BKFJ40), but I gotta admit I like the dune beige over the dark green. It also has lockers and cloth seats. Interesting info though, sounds like it's one of the first few hundred of the 95's. Is it possible they were running both 94's and 95's at approx the same time on the line?

Does your info show any 12/94 1995 models being produced, or are they all 1/95?

As far as I know there has never been simultanious production of two different model years. All the information I have identifies 1-95 as the first production month for the 1995 model year. Your tag infers that 93520 to, at least, 93849 may have actually been assembled in the last few days of 1994. Perhaps the "offical" start date gun was jumped by Arraco.
 
Last edited:
As far as I know there has never been simultanious production of two different model years. All the information I have identifies 1-95 as the first production month for the 1995 model year. Your tag infers that 93520 to, at least, 93849 may have actually been assembled in the last few days of 1994. Perhaps the "offical" start date gun was jumped by Arraco.

I'd have to dig in some boxes, but I believe I bought a brand new 1996 on Halloween eve in 1995.
 
I'd have to dig in some boxes, but I believe I bought a brand new 1996 on Halloween eve in 1995.

That would not surprise me. Most often the model-year break is in September.
 
Sure wish I had been smart enough back then to buy two, saving one for a rainy day: Tomorrow. :grinpimp:

Your problem is you run into tree-trimmer trucks....:p


Oh, wait, I mean they run into you.....:doh:
 
You may or may not care, but I'll share anyway. Depending on your state, and you should check, the 95's may or may not be subjected to OBDII testing. I ran into a problem where an inspection station failed a 95 because of the CEL. It passed the sniffer. The law in Texas clearly states that 1996 and on year models were to be subjected to OBDII testing, not 95's.

Anyway, he failed it because his code reader said this and that. Ultimately, he learned he was in the wrong to do so, did issue an inspection sticker, and was reported. Some people you just don't F' with.
 
You may or may not care, but I'll share anyway. Depending on your state, and you should check, the 95's may or may not be subjected to OBDII testing. I ran into a problem where an inspection station failed a 95 because of the CEL. It passed the sniffer. The law in Texas clearly states that 1996 and on year models were to be subjected to OBDII testing, not 95's.

Anyway, he failed it because his code reader said this and that. Ultimately, he learned he was in the wrong to do so, did issue an inspection sticker, and was reported. Some people you just don't F' with.

My understanding is that the '95s are "voluntary OBDII compliant". I like having the OBDII port, but when I get emissions testing, it's tailpipe sniffing only at idle.
 
what does the 608 on the bottom line mean?

mine says build date 12/93, and has an R, so it's a 94 then?

Cdan? how far from the end of the line was my rig?
vin.webp
 
mine says build date 12/93, and has an R, so it's a 94 then? Cdan? how far from the end of the line was my rig?

Yes, the "R" means 1994 model. Do you mean how far from the end of the 94 models? If so, see post 14. You are way far off from the last 94 made.
 
That would not surprise me. Most often the model-year break is in September.

Dan,

do you have any info on the last FZJ80 VIN produced? I've been wondering about this, since I have an 8/97 build date. If the model year production ended in August that year, it means I have one of the very last 80s. My last six digits are 184378. Just wondering how close to the end that is.
 
Thats getting closer. Question for you though Golar: I assume your build date is 12/94. What is the EPA conforming year on the under hood sticker?
 
Back
Top Bottom