Brake lights not working

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 25, 2005
Threads
19
Messages
84
Location
Cave Creek AZ
So I recently got pulled over because my brake lights were not working. I figured it was just a fuse and went to go replace it. The fuse was completely fine. My brother told me there is a switch located near the brake pedal? Does anyone know whats going on?:confused:
 
IIRC there is more than one fuse you need to check...Hants rant into the same issue coming back from CM07 and as I remember it wasn't the taillight fuse the second time that blew.

This is the same vehicle that you are having to use the screwdriver trick to shift out of park on correct?

As for the "switch"...Not sure on a '94 but on my '97 there is a brake switch at the top of the pedal arm way up under the dash...Couldn't hurt to look and insure that at least the connector is definitely attached. When I press and release my brakes I can hear the switch, if I listen for it.

Try looking at this http://homepage.mac.com/dfmorse/FuseChart3.5.1/index.html and replace, don't just check as fuses can blow where you can't easily see, what appears to be fuses #2, #4, and maybe even #8
 
Back
Top Bottom