brake booster studs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

cruiserjunktion

Cruiserjunktion@gmail.com
GOLD Star
Joined
May 19, 2005
Threads
733
Messages
6,638
Location
North Florida
I purchased a booster from another mud member.

It showed up w/ 2 broken studs.

The broken studs are on the master side not the firewall side.

Are these studs replaceable?

Does the booster need to come apart to replace them?

Thanks,

MEL
 
You might be able to replace the studs, the booster will need to be seperated....

I have no idea where you are going to find those studs....mcmaster-car perhaps...or another booster?


What booster do you need bud?


Hit me with a PM, or you should still have my cell #.


-Steve
 
You will have to split it to replace the studs... be careful its spring- loaded..I position then in a press so when you remove the retainer you can let the press off slowly and keep control of the situation...most likely the diaphram is old and brittle & will tear when disturbed...
 
Hi All:

"Mel," I just swapped in a replacement brake booster for the dead drum brake booster in my '74. If you like I can try to remove two of the mounting studs from the dead booster and send 'em to you.

Regards,

Alan
Seattle
 
Mel, I'll go you one better. I think I have an extra shell laying around the shop from a booster that had a cracked plastic center hub. I'll toss it in the box with the U bolt skidplates if you want it.

Of course I wont guarantee that those massive skidplates wont break off the studs before it gets to you!;p
 
65swb-

my booster is from an 81 fj40....

is this an easy swap?

Thanks for watching out for another mud member

I asked the seller (ih8mud member) of this item for a partial refund....... no answer yet

I hope he is as professional as you and all the other mud members I have dealt with........
 
mel lowe said:
I asked the seller (ih8mud member) of this item for a partial refund....... no answer yet



Partial refund?


You cannot use it like it was sold to you, and you REALLY do not want to mess with seperating one....I know that I wouldn't. I have in the past, and they suck, period.



Good luck pal!


-Steve
 
Sorry Mel, I did not realize it was an 81 when I offered it to you. The shell I have is from a 71ish FJ40. I second Poser on not trying to open up the shell. I actually paid a machine shop to build me a pair of SST shell holders so that I could service boosters in house, but I hardly ever use them.

Also good on you for not mentioning the guy's name right off the bat and giving him a chance to make things good with you. That is the MUD way.:)
 
Back
Top Bottom