Bottle jack mounting?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 20, 2005
Threads
42
Messages
1,779
Location
Chesapeake, VA
Website
theshealys.com
I've seen the bottle jacks under the drivers seats in pictures. I can't tell if it is secured to something. Is there a mounting bracket there to hold it from rolling around and not make noise? Can I see pictures of this either OE or custom made?

I know the two rods for the jack mount to the brackets under the passenger rear seat on the wheel well. I'm missing the handle piece. Where would that mount? Is it the one that's supposed to be in the tool roll?
 
The jack uses it's ram to tighten itself against the bracket at the top and pushes against the step at the back. There's an approx. 2"x3" rubber pad on the floor under the base of the jack. The crank handle piece I keep with the toolbag but not in it, big rubberbanded on the floor under the seat.
 
OH cool that shouldn't be to hard to fab something up for the jack. Do you have a pic of the whole handle?
 
WES1977 said:
OH cool that shouldn't be to hard to fab something up for the jack. Do you have a pic of the whole handle?

I've got a lot of the truck in masking right now so I can paint a few parts of it and that'll keep me away from the rear jackhandle mount. It's two rods about 3 feet long plus the cranking part that crosses the longer piece's "T". Pretty common so landpimp will probably have one he can show you :D.
 
Here's the handle.
IMG_0021.webp
 
Well, I could be wrong, but the one I have is the Original OEM handle for my 75. That SOR one might be OEM but later model, which they deemed compatible to sell for all years. Like that OEM jack, it's not the same as my 40's, but would work the same. Prob out of a later model truck.
 
I was messing in my Tacoma a few mins ago and I saw my tool roll for my truck and it was open, the handle sticking out I thought of my Bottle jack for my cruiser. Took it out and perfect fit. Looks like i'm going to pick up a 2003 tacoma tool roll.
 
Back
Top Bottom