I have a rounded of bolt on the releases cylinder of my 60. Not a lot of space to work with. Has anyone used the products with any success, Or maybe know another trick that might work.
bolt out or metrinch
- Thread starter cruiserforlife
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I've got a set of the bolt outs. They work great for fasteners with stripped heads. No experience with the other tool you mentioned.
You can also drive a slightly smaller 12 point socket on and try to remove whatever. Or weld a nut to the head if you have access. But the bolt outs work great if you have them.
Nick
You can also drive a slightly smaller 12 point socket on and try to remove whatever. Or weld a nut to the head if you have access. But the bolt outs work great if you have them.
Nick
Had a metrench for many years and the set has never failed me.
- Joined
- Jan 8, 2006
- Threads
- 265
- Messages
- 9,822
- Location
- Ashland, OR
- Website
- www.jeffersonstatecruisers.com
The craftsmen bolt outs work well, but they work best if you can hammer them onto the rounded nut first.... 