Blower Motor Wiring

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 6, 2008
Threads
35
Messages
96
So my blower was only working high speed, after looking here I found were someone had replaced the resistor and gave the part # and had pictures, which was great. But I have a question, when I pull the switch to the first setting that is high speed, then the second setting is low, this seems backwards to me, is this normal? I reversed the wires, now the first setting is low, the second is high.
 
You’re good. Keep it as is.
 
So my blower was only working high speed, after looking here I found were someone had replaced the resistor and gave the part # and had pictures, which was great. But I have a question, when I pull the switch to the first setting that is high speed, then the second setting is low, this seems backwards to me, is this normal? I reversed the wires, now the first setting is low, the second is high.
Do you have a link to the resistor shop?

I couldn't source one for my FJ55, so I made my own. I would like to replace it one day as its a bit of a mess.
 
Back
Top Bottom