Birfield balls different colors?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 19, 2007
Threads
59
Messages
538
Location
Harrisonburg, VA
In the process of rebuilding the front birfields on my wife’s 80. The balls on one side are silver the other side has a gold tint. Similar to the difference in the balls in some steering gears. We’ve had the truck since about 30k and there is no evidence of anyone ever being in the knuckles before, the sides of the hub flange haven’t been beat with a hammer to get the cone washers out. I swapped the birfields to opposite sides. Just wondering, I’ve been in a lot of birfields and never noticed different color balls.
 
Light gold tint is a low heat tempering color when steel is heated in standard atmosphere. They were probably tempered, after hardening and grinding, in a standard atmosphere furnace.
Knowing that bearings are tempered at about the temp range that would cause a light gold to straw color, I'd say its a perfectly normal variation in the process.

I could be full of :censor: too; I've never seen Mr. T's process/inspection sheets.
 
Who'da thought! Different color balls! The light gold balls are probably just the tiniest fraction bigger than the silver ones. Just guessing.
 
Who'da thought! Different color balls! The light gold balls are probably just the tiniest fraction bigger than the silver ones. Just guessing.
You might be right. The silver balls come right out of the cage, the gold balls have to be persuaded out.
 
Back
Top Bottom