Banjo Fitting Question - fuel pump

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2003
Threads
186
Messages
3,183
Location
Tulsa, OK
So, the fuel pump went out on the white trash lexus - finally got it replaced the other day, and the fitting - I think it's called a banjo fitting leaks. Is there suposed to be a washer under this to seal it?

Loosed it, cleaned it, tightened it, leaked less for a day, now it doesn't leak at all today. If there is suposed to be a copper washer (someone told me it was) let me know and I'll put one on.
 
There's supposed to be a copper washer on both the top and bottom of the fitting. And if you believe the FSM, you should replace the washers with new ones, rather than reuse the old ones, whenever you change out the filter.
 
yup there is supposed to be a copper washer there, on mine it was leaking on the aluminum fuel rail, i pulled the banjo bolt out to find the hole slightly stripped and teflon taped, when i tried to put the bolt back in i finished whatever threads were left. ended up having to drill and tap to a larger NPT size, then find a brass plug as well as a metric tap to match the banjo bolt so i could drill and tap the plug for the banjo bolt to go back in, then finally tweek the fuel line outwards because the plug changed the location of the bolt.
The long and drawn out moral to this story is DONT OVERTIGHTEN THE BOLT, or you will end up bitter like me.
 
Tricky T - I'd believe the FSM - makes sense that the copper gasket is gonna conform to any irregularities, and if removed and re-installed - the irregularities aren't going to line up anymore - if that makes any sense?

Cody C- too late, I'm already bitter - doesn't have anything to do with the Bajo Fitting, just a general condition.

Thanks for the help guys - no more leaky gassy for me.
 
I'm not understanding how you would see a leak from the fuel pump in the first place? :confused::confused::confused:
 
I'm not understanding how you would see a leak from the fuel pump in the first place? :confused::confused::confused:

Easy - To access the fuel pump you take the rear seats outs, and then there is an access panel. If you're paranoid about blowing yourself up, you leave this access panel off for a couple days so you can check your connections and make sure no leaks.
 
Easy - To access the fuel pump you take the rear seats outs, and then there is an access panel. If you're paranoid about blowing yourself up, you leave this access panel off for a couple days so you can check your connections and make sure no leaks.

Yea I know where it is which is why I asked this but that makes much more sense now that I realize you left the lid off and looked in to it. Good thinking too otherwise a potentially explosive problem later ...
:cheers:
 
Back
Top Bottom