Back Up Light Switch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 8, 2006
Threads
51
Messages
168
Location
Kentucky
Is the backup light switch on the transmission as difficult to get to as it appears? Any suggestions on how to get to it and how to remove it? Is it screwed in? It appears to be screwed in, but it's hard to tell from such bad viewing angles...

Thanks in advance!
 
It is screwed in. It is a pain to reach unless you have small hands or remove the tranny tunnel. :cheers:
FJTCaseM.webp
 
Yea, Man! I removed the tunnel cover to gain access to mine,:mad: screwed in to the housing:crybaby: pita to get to tho:beer:
 
coolerman - great pic. helps to see it exposed like that. i assume that the two nodes on the end are for the incoming power wire and for the outgoing wire to the back up light? i am getting juice to the switch, but no juice out of it, so i assume the switch has gone bad.
 
I took a 1/2" drive deep socket(forget what size) and plumbed the wires through it. Then I took a long screwdriver big enough for the blade to catch in the 1/2" drive and turned the switch out with a crescent wrench. Creative... yes but it came out and seemed easier than removing the tunnel. Matt
 
Back
Top Bottom