Axle seal replacement prices

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 10, 2007
Threads
1
Messages
2
Location
Jville NC
Website
www.carolink5.com
Hello everyone, I've been lurking for a month or so and like what I see around here. Here is my dilema.

Replace both front axle seals, wipers, trunnion bearings, is $400 plus parts over priced? It's not a shop doing the work, but an individual instead.

Thanks everyone.
 
is $400 plus parts over priced?

I believe shop time on that job is about 12 hours. If you were a 2 banana DIY guy with average shop tools and had never done the job before, it would take you 24+ hours. I think $400 is a fair price for an arms-length transaction. My biggest concern would be the experience level of the guy doing the job. If this is his first 80-Series then be sure you have him read through the FAQ.

-B-
 
Is that including cleaning/regreasing the Birf's?
 
I wouldn't do it for $400 for someone I didn't know. It is a lot of work. I agee with B, that you could consider tackling this yourself, since the technical aspects of the job are not that difficult.

Considering that the parts cost $200, and the proposed labor is $400, that's 1/2 the price a Toyota dealer would charge you. Thus, a good deal, if you are confident in the guy's work.
 
Birf rebuild parts

Check Marvin Crawlers , I bought kit to do both sides and included Marvins super seals for 85 dollars plus UPS chg. Does not include new wheel bearings.I am gonna do the rebuild with my mechanic buddy in the spring.
 
Back
Top Bottom