Axle hub flanges

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 31, 2024
Threads
3
Messages
25
Location
Kentucky
I decided to finally do the front wheel bearing but I can't get the new hub flanges to go onto the axle. The hub splines on the one I took off look like deeper "V" than the new. Do I have the wrong part? I'll attach photos.

PXL_20260312_174043120.webp


PXL_20260312_174049491.webp
 
Spline count is the same... What part # did you order? And did you order genuine Toyota part?
 
Spline count is the same... What part # did you order? And did you order genuine Toyota part?
43421-60060

I did order from an eBay seller but came in Toyota packaging. Starting to be a little weary of ebay lately. The teeth just look deeper than the new ones and don't look that worn
 
That's the correct part number. They're $68 from the dealership. How much did you save not buying real parts?
 
The finish on the new hub doesn't look to be genuine Toyota. Can you post a picture of the packaging? Something tells me its aftermarket.
 
Did your old flanges slide off easily? Have a pic of your axle splines?
 
Thank you guys. I was stumped. Almost forked over for a new axle thinking that was aftermarket or the splines were worn out
 
Back
Top Bottom