Awesome Front Grill!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 12, 2008
Threads
57
Messages
385
Location
Newberg, Oregon
Hey all, I was searching on here last week and saw an amazing looking mesh grill that someone had created and put on their rig with clear lights and a new paint job. Hoping someone can lead me to that thread. I think the owner was out of Colorado. :cheers:
 
There's several different metal meshes you can use. I did a similar mod on a little D50 (Dodge mini-pickup) after I accidentally stuck my hand through the plastic grill pushing it out of a snowbank when I was wheeling. I used heavy steel diamond mesh at the time - bought a similar sized chunk at a scrap metal yard for $5. Stealer wanted a mortgage payment for stock replacement. Necessity sometimes is the mother of invention. Used a Dremel tool to cut out the original center section. Made final fine tuning cuts and spray painted my "new" grill flat black and mounted it on back side what was left of original grill. As I remember, it looked "custom" and had a few admiring remarks for a couple of hours work. YMMV
 
Thanks for all the replies guys!

I plan to try and make a similar style grill. My inspiration will be Treeroot's!
 
hey treeroot, how did you bend the outer wire which you attached the mesh to? I'd really like to do this to my 80
 
Oh yeah! With all this free time, gettin fired and all (anyone in Phx need a mechanic?), I'm gona do this tomorrow! Looks awesome.
 
Just found this thread. :grinpimp:

The outer ring was bent using a set of vise grips, a hammer, my teeth, and a vise. I made up a paper form and bent it to match. There are a ton of build pics in the link. Here--->80 Grill

https://forum.ih8mud.com/80-series-tech/229592-fjz80-strut-grill-satoshi-grill-mod-style.html
DSCF6298.webp
 
Last edited:
treeroot, you have an amazing 80series, I would like to do something like that but I have the :princess:version of the 80 series...I guess I could do a L E X U S instead of T O Y O T A, anyhow I was wondering why you snorkle is so shiny, did you clearcoat it? It looks good I was just wondering.
 
treeroot, you have an amazing 80series, I would like to do something like that but I have the :princess:version of the 80 series...I guess I could do a L E X U S instead of T O Y O T A, anyhow I was wondering why you snorkle is so shiny, did you clearcoat it? It looks good I was just wondering.

I got a wild hare and painted it... It matches the powdercoat
DSCF5408.webp
 
Hey Treeroot, . Do you have a paint color code available for Snorkel color ?? Thanks :)

He posted color code in another thread.....I'll edit this when i get it.

"I started by sandblasting the snorkel and the backs of all the grill pieces. The ARB/Safari has a texture that I didn't want so I sanded it down. Started with a pretty agressive grit and worked down to the finest I had. I then washed everything in acetone followed by dish soap and then acetone again. Before paint I sanded everything again with the red Scotch pads. I read about antistatic paint needed but I didn't use it. The guy at the paint store recommended I use Bulldog as the first step. Paint used:

Bulldog adhesion promoter
Omni MP282 with MH283 hardner
Color was PPG Deltron2000 DBC basecoat with DT870 reducer
Clear was PPG Concept DCU2042, DT870 reducer, DCX61 hardner, and some DX814 universal flexibilizer.

Three light coats of Bulldog
two coats primer
two coats color
and two coats clear. 1.4m HVLP for color and clear, crappy gun for primer." per treerootCO
 
Last edited:
I'm sure I've already commented on this in other threads where this truck has been posted, but I'll say it again. That's the sweetest 80 I've ever seen. The perfect combination of bling for a 80. Not too much, but just enough to look really, really cool and done right.

That truck needs a winch, but a low profile one painted mostly black or dark glossy grey and it would be complete.
 
Hey Treeroot, . Do you have a paint color code available for Snorkel color ?? Thanks :)

The snorkel and grill surround are painted PPG DBC4296 Medium Platinum Metallic. It is a Deltron2000 basecoat.

The mesh and the bumper/sliders are powdercoated Argent - not sure of the brand.
 
Back
Top Bottom