Autel MaxiDAS DS708

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 1, 2017
Threads
26
Messages
90
Location
Central NC
I did search here for OBD-2 scanners and found several different recommendations. It seems that there is a large jump between the low-end DIY and the higher-end models. I'd hate to invest in a unit only to find it wouldn't diagnose a certain type of problem...

Any insight as to this product?

'96 that has been sitting for two years, and there is no telling what is going on with the truck.
 
N.B. my 80 is OBD1, but I have used this on dozens of vehicles and it works just fine for pulling codes. If you are not needing to program the ECUs in the cars with something like a VCI cable and Techstream, anything more is overkill IMO.

Amazon.com: Launchh Mini ELM327 Interface V2.1 OBDII OBD2 Bluetooth Car Auto Diagnostic Scanner: Automotive
x2 ($800 is really a lot to spend if you don't own a shop, and if you do, it's not enough)
Really depends on what you want to do with it.
Cheap reader:
Product Detail
If you're just looking for codes and don't mind using your phone, there are readers for that.
Best OBD2 Bluetooth Scanners & Buying Guide – Scan Tool Center
I prefer to use my laptop, so I have a larger screen, access to Excel, etc. while I'm working, but that's just my personal preference.
 
"Really depends on what you want to do with it."

Great point...I am new to vehicles that are this computerized and thought I might need a higher-end scanner that can possibly do more than a simple reader (learning here). I built an OBD-1 for an early model BMW and was very disappointed in the limited info it provided...so maybe it's a "once bitten twice shy" kinda thing.
 
IMHO the 80 series ODBII (started in 95 remember) is still pretty limited on what it can monitor with sensors it has. Willing to guess a UltraGauge is going to give you all the info you can pry from an 80 for a fraction of the cost of a full blown bells and whistles reader.
 
"is still pretty limited on what it can monitor with sensors it has."

Ah......didn't think about the limitations being on the vehicle side...good info!
 
I got rid of my high end Snap on several years ago. My brother however decided to go to work for a heavy equipment repair facility and bought a slightly better tablet style unit with all the extra modules from the mobile tool peddler (MATCO) paid a hefty sum of money and it reads obd1 as well as obd2 srs and ABS as well as it can simulate sensor problems, it reads through a Bluetooth module so you don't have to be connected by a cable etc... and has protocols for every make and model including stuff not sold here in the states....here's the point of the story. On my 93 and a buddies 95 he can get about the same limited information we're talking over $2k with modules etc... Take that for what it's worth. I wouldn't buy a top of the line unit if you're not in the industry or own a shop. My need for one sent me down the road of buying an inovva unit for obd1,obd2. They now make a similarly priced unit 31703 that does that plus ABS and SRS Less than $300. If you want all the reading capabilities that's a good scanner. If you think you need even more then pay the man and get a really expensive unit.
 
Back
Top Bottom