ATM rad for Power Steering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yep, that is just fine. Not even a need to flush it!
 
Probably be OK, but why?
One less part in the front end to get damaged or rust out.

One way or another I have to cap the ATM ports on the rad, so why not put them to use.

A good point had been brought up to me though, that heat transfer from the coolant may actually heat the PS fluid. I suppoose this is possible. I really dont know how much transfer there is in the rad to the ATM passages, nor how hot the fluid in the PS lines get however.
 
Back
Top Bottom