ARP Hub Stud Kit

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 30, 2014
Threads
15
Messages
395
Location
Montana
Hi, I'm wondering if anyone has used this kit? My question is about the cone washers. They protrude a lot. In this pic they are not torqued but I know they will still protrude quite a bit. I'm used to them being closer to flush with the hub. Also the studs are quite long, why so long?

IMG_2199.webp
 
could be studs for another vehicle that have the same thread pitch just need to be longer, cheaper for them to just package it as the length shouldn't really be a big deal


You're exactly right. I called TG and asked them. This kit is for multiple applications, and so they are a bit longer than necessary for my rig. And they also said the cone washers will protrude just a tad bit more on mine. I measured the depth of the washers and compared to the seat in the hub, looks like a perfect match and they look fine torqued up
 
Back
Top Bottom