Arizona Classifieds / For Sale / Wanted

[centralworks]

I have a box of FJ40 / FJ60 carburetors and linkage for sale.
FJ40 Landcruiser Carburetor Parts / Linkages

 

[YotaLvr]

Wanted OEM spare tire lowering tool kit for a 1996 LX450. I'm in Tucson (west side of Kolb exit).

Let me know if you can meetup anytime today (Friday 8/4).

Cell @ (760!)715-5096
Thanks!

 

[Pitch]

Wanted OEM spare tire lowering tool kit for a 1996 LX450. I'm in Tucson (west side of Kolb exit).

Let me know if you can meetup anytime today (Friday 8/4).

Cell @ (760!)715-5096
Thanks!

I have one from a 97 LC that you can have, but it is in Flag.

 

[medtro]

Do you want the tool kit that is stored in the rear quarter or the crane that goes between frames?

 

[YotaLvr]

Do you want the tool kit that is stored in the rear quarter or the crane that goes between frames?

I'm looking for the bag that is stored in the rear quarter. It's the pieces that clip together to reach in and lower the spare. I've got the bottle jack.

 

[YotaLvr]

I have one from a 97 LC that you can have, but it is in Flag.

Darn. I just quit my job in FLG on Wednesday. Thanks for the offer though!

 

[Pitch]

Tundra wheels, 5 lug (Fit 5 lug Cruisers, Sequoia, and Tundra).

Tundra wheels
CL price: $150
CSC price: 1 30 pack of Mexican beer.

 

[TexAZ]

First gen or second gen tundra?

 

[Living in the Past]

First gen or second gen tundra?

2010 is second generation with five lugs. My Sequoia is going to need new tires and wouldn't mind down sizing from 20" to 18" but not with these rims. @Pitch what did you replace them with?

 

[TexAZ]

I have 20s now. Wheeling with them was a bad idea.
Wouldn't mind a second set in either an 18, or rock warrior 17s just for off road trips

 

[brices123]

I have 20s now. Wheeling with them was a bad idea.
Wouldn't mind a second set in either an 18, or rock warrior 17s just for off road trips

Eric, I have a set of factory 18” rims with factory tires for our 2014 200. If you want them, you can have them for a small price. PM me if interested.

 

[Swampmonger]

I have 20s now. Wheeling with them was a bad idea.
Wouldn't mind a second set in either an 18, or rock warrior 17s just for off road trips

I have a set of 5 takeoffs from my '16 200.

 

[Pitch]

First gen or second gen tundra?

2nd gen, 5x150 pattern. They should fit your 200. 18x8 TRD wheels.

 

[Pitch]

2010 is second generation with five lugs. My Sequoia is going to need new tires and wouldn't mind down sizing from 20" to 18" but not with these rims. @Pitch what did you replace them with?

Another set of factory Tundra wheels that I had powdercoated.
New

Old

 

[Chrismanjs]

Another set of factory Tundra wheels that I had powdercoated.
New
View attachment 1510818
Old

View attachment 1510824

That looks really good!

 

[Dissent]

I have a lightly used Tatton Front Double-Cardan driveshaft for sale. I'm looking for $250 plus shipping or free local pickup. I've gone part-time and have my OEM shaft back in place so I don't need this one anymore. It has 1310 Spicer joints and the flanges are machined to accept the factory hardware.

The collapsed flange to flange measurement is 30". I believe he built this to be 32" based on what his book said. Looks like it will extend to about 33.5" safely.

 

[ScottyDog]

ISO - FZJ80 Driver side headlight. I took a rock to mine over the weekend and after all the rain its filled with water.

 

[mtkreitz]

Does anyone have any use for these? RockJock says they are exhaust donuts for a 93-94 LC. Otherwise they are hitting the circular filing cabinet.

 

[medtro]

Does anyone have any use for these? RockJock says they are exhaust donuts for a 93-94 LC. Otherwise they are hitting the circular filing cabinet.View attachment 1514424

What is the ID, OD and thickness?

 

[mtkreitz]

What is the ID, OD and thickness?

There are (2) sizes...

68mm OD x 56mm ID x 5mm thick
65mm OD x 50mm ID x 5mm thick