sold! Pm inbound
Arizona Classifieds / For Sale / Wanted
- Thread starter blatant
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
SOLD
Selling my old LX450 wheels with 315/75/16 tires. Mud price is $200.
These are from a 1997 Lexus LX450. 16" rims. One is the standard factory aluminum rim, the other four are chromed. There is some pitting of the chrome. Tires are 4-ProComp Extreme Mud Terrain tires with the spare being a Goodyear Wrangler MTR. All tires are 315/75/16s (35 inch tall). Date code for the pro-comps are, 4616 (November of 2016), the Goodyear is 4114 (October of 2014). The Goodyear has never been used, the pro comps have 13/32 of tread left. One has a screw in it but holds air.
Selling my old LX450 wheels with 315/75/16 tires. Mud price is $200.
These are from a 1997 Lexus LX450. 16" rims. One is the standard factory aluminum rim, the other four are chromed. There is some pitting of the chrome. Tires are 4-ProComp Extreme Mud Terrain tires with the spare being a Goodyear Wrangler MTR. All tires are 315/75/16s (35 inch tall). Date code for the pro-comps are, 4616 (November of 2016), the Goodyear is 4114 (October of 2014). The Goodyear has never been used, the pro comps have 13/32 of tread left. One has a screw in it but holds air.
Last edited:
I’ll take them if still available
Still got em, sent a PM.
I would take it if you still have it.
Green Mountain Pellet Smoker, Daniel Boone model - good condition, really clean. Non WIFI model. Includes bag of pellets, meat probe and full Green Mountain cover plus factory cookbook/recipes. Brand new igniter installed this year. Caster wheels need replacement, low pellet warning alarm disconnected. $300 OBO.
Located in South Scottsdale area.
Located in South Scottsdale area.
1999 Cruiser wheel. Just one with an old Yoko Geolander tire that is certainly not recommended for daily use. Was the spare on our UZJ100.
5x150 bolt pattern, with a bit of oxidation/patina.
$30 in Flagstaff
Also, still have an 80 series rear driveshaft with newer (30k’ish miles 555 U joints)
$50
5x150 bolt pattern, with a bit of oxidation/patina.
$30 in Flagstaff
Also, still have an 80 series rear driveshaft with newer (30k’ish miles 555 U joints)
$50
Too bad it's 16 inch. Otherwise I will take it.
2 x Denso 234-4138 to suit 2002.08 through 2005.05. Installed and run for about 30 seconds before realising (via the new fault codes) that I mustn’t have been paying attention when I bought these they’re the wrong part 
$50 for both!
$50 for both!
I've got some 100 series parts for sale...
Set of 4 new AHC globes in sealed boxes - $550 SOLDSet of 5 take off wheels from a 2000 LX470 w/ old tires - FREE SOLD
Non-100 series stuff...
Located in North Phoenix.
Rhino full exhaust system in open box (long tube headers only fit RHD) - $800
x2 axle boot kits with both types of band tools included - $75
Non-100 series stuff...
Vortex Razor HD LHT 3-15x42mm rifle scope - $800
Located in North Phoenix.
Last edited:
xeuxaz
SILVER Star
Fire sale, potentially moving soon.
Set of 4 18x9 5x150 +25 SCS F5 Gunmetal wheels no tires, nearly brand new. $250
Edit: Someone reached out for them, they are pending.
Edit: Someone reached out for them, they are pending.
Last edited:
Free to anyone that would want these. Taking up too much space in my garage
Brand New Hub Assembly
Had to replace a wheel bearing on my 2004 GX470 while traveling, bought two in order to get the second side done later... My 'wheel bearing noise' turned out to be caused by a loose fender liner due blowing into the tire at speed due to broken zip ties.... I've since sold the truck and have no use for this.
Brand New from Napa, store for around $120
Beck Arnley part number 051-6470
Should work for the 4 rubber and Tacoma as well.
$60 located in the West valley North of the Cardinals Stadium
Had to replace a wheel bearing on my 2004 GX470 while traveling, bought two in order to get the second side done later... My 'wheel bearing noise' turned out to be caused by a loose fender liner due blowing into the tire at speed due to broken zip ties.... I've since sold the truck and have no use for this.
Brand New from Napa, store for around $120
Beck Arnley part number 051-6470
Should work for the 4 rubber and Tacoma as well.
$60 located in the West valley North of the Cardinals Stadium
I'm still trying to offload my ARB Touring awning (now with side wall!) and a 3-bar Rhino Rack Aero cross-bar system for the 100 Series. Make an offer!
View attachment 3867301
View attachment 3867302
Are you selling the rig too?
Anyone have a single 5x150 18” wheel? I need a spare for my Tundra. Extra love if it is holding a 295/70/18 tire
*****Got one, thanks Spike!
*****Got one, thanks Spike!
Last edited:
I will be in Tucson next week for 9 days and could meet up or deliver of on my way in or out of Tucson.
I have the following NEW Dobinsons suspension parts for 40/45 series up to 1979
1 UB59-450K U-Bolt set (pair) $70
3 UB59-453-3 U-Bolt set (pair) $70 each
2 SP59-006 Greasable Pin Kit (pair) $50 each
2 SK59-002 Greasable Shackle Kit (pair) $90 each
2 PB59-1013K Polyurethane Leaf Spring Bushing Kit 25mm eyes $45 each
I have the following NEW Dobinsons suspension parts for 40/45 series up to 1979
1 UB59-450K U-Bolt set (pair) $70
3 UB59-453-3 U-Bolt set (pair) $70 each
2 SP59-006 Greasable Pin Kit (pair) $50 each
2 SK59-002 Greasable Shackle Kit (pair) $90 each
2 PB59-1013K Polyurethane Leaf Spring Bushing Kit 25mm eyes $45 each