Anyone running a 35" with -10 Offset wheels?

[offoradjunkie]

I found a deal on Marketplace for 35"s and Nomad Saharas, but they are a -10 offset. If anyone has any pictures, post them up.

 

[GTV]

They will get into the fenders pretty hard at 12:00.

 

[TahoeZ]

Agreed; those will rub hard if you don't cut the sheet metal. You'll want to be at +25 at least with 35s to clear the stock fender.

 

[jgalv]

Agreed with all. I just put 315/75R16 ko3’s on stock 16’s with 1.25” spacers. About 28mm effective offset, wheels are 8” wide. It’s doable but tight, and the ko3’s are more like 34.6”.

-10 offset you’re going to have a bad time.

 

[GTV]

Agreed; those will rub hard if you don't cut the sheet metal. You'll want to be at +25 at least with 35s to clear the stock fender.

There are still options outside of cutting, but more offset adds unnecessary work, IMO.

Narrow tires
Bump stops are easily extended, but that sacrifices what little travel there is on a 100.
Body lift.
Roll/re-work fenders and liners.