I know. For her, it's never enough.......
Anyone? - CLC Classifieds thread
- Thread starter Bodean
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Stair stepper....you mean clothes rack?
Dunno that this applies to many here... but ya never know...
Bought a set of Reds and Racelines, but the beadlocks are the wrong bolt pattern for me... so they need to go.
17"x9.5" w/ 4"BS, 5on5.5" BP, steel rings - http://www.racelinebeadlocks.com/p-233-rt233-st-monster.aspx
(4) have been wheeled and show some rash on the steel rings; otherwise, in almost perfect shape. (2) of these have American Racing center caps, but they pop out if that's not your jam - $1250 for (4)
(1) wheel is almost new and was used as a spare; has only had a spare mounted and dismounted - not wheeled - $325
***All (5) for $1500
(1) 37" Red Label Krawler - only mounted and dismounted, ZERO miles. Still has rubber nipples on the tread face - $400
(5) wheels and (1) Red - $1800
I'm in Hot Springs, AR, though delivery might be possible. Text is best - 501 two6two 80 18 Jordan
For pics - https://www.flickr.com/gp/53518105@N02/9114wi
Bought a set of Reds and Racelines, but the beadlocks are the wrong bolt pattern for me... so they need to go.
17"x9.5" w/ 4"BS, 5on5.5" BP, steel rings - http://www.racelinebeadlocks.com/p-233-rt233-st-monster.aspx
(4) have been wheeled and show some rash on the steel rings; otherwise, in almost perfect shape. (2) of these have American Racing center caps, but they pop out if that's not your jam - $1250 for (4)
(1) wheel is almost new and was used as a spare; has only had a spare mounted and dismounted - not wheeled - $325
***All (5) for $1500
(1) 37" Red Label Krawler - only mounted and dismounted, ZERO miles. Still has rubber nipples on the tread face - $400
(5) wheels and (1) Red - $1800
I'm in Hot Springs, AR, though delivery might be possible. Text is best - 501 two6two 80 18 Jordan
For pics - https://www.flickr.com/gp/53518105@N02/9114wi
I have a set of DOT Treps that have been grooved. The outer lugs transitioning to the sidewalls are up to 1.5" deep. The middle is 19/32nds on average.
You'll notice some of the pics in the album are from before the groove job. The idea was to remove some rubber to create voids for the lugs to grab better and wrap a little better. I'm pleased with how the groove came out, but now I'm moving to the world of stickies.
In all my years of perusing the world of off-road online classifieds, I've never seen a set of 37" for a 17" wheel DOT Treps; in fact, I was told these were stickies when I bought them. After digging through lots of info on the net, I'm finally fairly confident they are DOT. There is a slim chance they are stickies, but I really don't think so.
That being said, it's tough to put a price on them because there's nothing out there to compare to in the used market, plus they're pretty far from how the factory rolled them out. They have right at about 22 to 24 hours of grooving in them as a set of (4), going down to the first layer of cords in spots, which doesn't concern me; these tires are bias-ply and super tough.
Asking $1000, or best offer. In Hot Springs, AR and text is best - 501 two6two 80 18 Jordan
https://www.flickr.com/gp/53518105@N02/brEr37
http://www.maxxis.com/catalog/tire-149-105-trepador-m8060
You'll notice some of the pics in the album are from before the groove job. The idea was to remove some rubber to create voids for the lugs to grab better and wrap a little better. I'm pleased with how the groove came out, but now I'm moving to the world of stickies.
In all my years of perusing the world of off-road online classifieds, I've never seen a set of 37" for a 17" wheel DOT Treps; in fact, I was told these were stickies when I bought them. After digging through lots of info on the net, I'm finally fairly confident they are DOT. There is a slim chance they are stickies, but I really don't think so.
That being said, it's tough to put a price on them because there's nothing out there to compare to in the used market, plus they're pretty far from how the factory rolled them out. They have right at about 22 to 24 hours of grooving in them as a set of (4), going down to the first layer of cords in spots, which doesn't concern me; these tires are bias-ply and super tough.
Asking $1000, or best offer. In Hot Springs, AR and text is best - 501 two6two 80 18 Jordan
https://www.flickr.com/gp/53518105@N02/brEr37
http://www.maxxis.com/catalog/tire-149-105-trepador-m8060
BNIB set of FJ60/62 Longfields by Trail-Gear
Came with a front axle I bought, and I have no plans to use them anytime soon. $400
Came with a front axle I bought, and I have no plans to use them anytime soon. $400
It was brought up elsewhere by @YotaJosh , so I'll put it here, too.
Bummer. Looks like they've dropped price again since they introduced the gun-drilled axles. Also, the warranty is only good for 12-months to the original buyer, so good chance you'd be out of warranty anyway if they break even if you purchased them brand new yourself.$18 discount and no warranty? Come on Jordan.
https://www.trail-gear.com/TG/Longf...Kit__FJ60_/i_0_0_3527/_303404-1-KIT.aspx#tab4
Factor in the $50 shipping, and it's more discount than you think, Josh... ;>)
Subtotal
$418.95
Trade Discount
$0.00
Shipping
$51.07
Tax
$0.00
Grand Total
$470.02
- Joined
- Apr 17, 2009
- Threads
- 16
- Messages
- 2,662
Jordan - when are you gonna build something with all these parts you collect from all over the planet? Let me know when you run a blue light special on that 37" red label.