Another KDSS Warning

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2018
Threads
33
Messages
560
Location
Omaha, NE
Just thought I'd throw this out there. My truck is only 2 years old with 18,000 miles and I already had surface rust forming. Everyone should get ahead of this and check their valves.

I used some 600 grain sand paper to work off the rust and applied LPS3. I'll check it again in 4 months or so.

Before:
y7coAG0FKQ4okb6QGjrrv2q21kRmZAK5aqFf54Ioodx3OHNrIxPgs62Pesbmiq9Lin3OBHuNdWRvew2q1kZYVwhCLCZrgEMHrszvsm-FmjZFeLBtXYQkWgwRrZ28PrX-ePVRnYJzA1hmbFBUNjL-EorTvXUWgAyn95g_80h3i9N3pOi_Py1jO6Mo0TtrGdjffvYLPk61xwje1WhmQPqd-H0IorBszdqcPhCsvhLUk0xb7goBkXFo6ZOILKhPe-rZH-CUZWYeHna7zw9hucTZOP6_UDMeg0gU7-BBz6dn_l0EVQnqFljY4Hc6_cdQheR47U8Z-ihTMXY1qCLEEn2Z8jUMM5t1-Mx7qzbsAQt47ajummIp0dMphu3csojUVb9Ic9bI30iMWNOcH7SCnvrvSmxd-a98_OAIQf_tPi-qxVJVj4glgGyUIuqiBlkauOMGrrqErhmyMrzh4EDrS3u8cCQeNdC1Qf2nanAVdA6BVpZB3lcJeHFXBfUWiChPgmZdZwoFacDyMlmZv-tdxgYJjoS9PFqo4_BMqrliJSV2QBNZhLKXeVguGh7wS7zQHOXicIIHd6O-2ysmWmEZpTUtdRcGPBCzWySBmrw0baKQZqPb9dIb45WezBOznMW2PjWsjZCW3aXOlq2g23ZyffmdqOOgmMwiVD8=w1306-h979-no


After:
LGQH7Zs-_r4wqBXsbNzhX0HalGt38OBdYFmSmEktxqjAD6VMFMa4s0eLTJY0tcFjhIARum9WB2x3KN20Tirvt-_MFvwRroMJSD6oI_HpHQQqLQovvxgZK2khQ7N2MjnqVchTYjONYpcQWaMBQO6Hdy_Jmp6dGUQwe1mYhcCVAlUbwGKdQtt8VNDPsMeLV1uKGDEieN8erdLCQkJfCmwhNGuaAOwgrQMw7EHS8tyvavqjUVILNZzUQuxyQCLPkFGNl_7UuNCdCG4H-ywdOj7FGt3VPNwJtBzWabL9aTNXjL6mZ_3TcmuEBRWdR02qGPmIlp6dqVVP5e258pZ0CWDMtav5iY13f-QLqdpr4mYi-vEZqncb9hHHfGVNI1nMMCkOXdmT2_a3zqpEggP2LCNbzrDfo-niCqyGTAK9qvNi8XXXuYsQt3SLWUvBbOVVSAqI6pON2pIcXXp7cjj3az3_K63gozjt7NjBmL3tWXXeL98Xp-YoY6wreDyqHHwUiSBsaLV2Ofoc4FIqwBM5XekMdlQw3PM86MrElmNDGO8HmKqnIxT2MLLkkeUHQobY_rLLw6NuOkfroudNxH2Ruyi7Nz_t2jtF6Q5zE6HsBLXL3h6YJAbBeTDDz78a9Jbn7W4dNteeD9OBXaW_lwFFF-2gZQsNLdqpQOg=w1306-h979-no
 
Will never cease to be amazed that Toyota won’t at least COAT these parts with something...if they won’t use rust-resistant metals to begin with.
 
Yea, I'm not really sure on what their thought process was?
 
Overall this has been the case on toyota for years. 98% bombproof amazing vehicles with a handful of significant issues that IF you are aware of and can plan for/monitor you won’t have problems.

But remain uneducated on those problems? Bad news jack.
 
Will never cease to be amazed that Toyota won’t at least COAT these parts with something...if they won’t use rust-resistant metals to begin with.
Like stainless steel? :flipoff2:
 
We already have a thread on this, but what the hell, add another.

BTW, other than new, that has to be the cleanest KDSS accumulator assembly on the planet.
 

Users who are viewing this thread

Back
Top Bottom