Another dang newbie

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 21, 2008
Threads
14
Messages
297
So, here I am, all new here and stuff. I have been looking at 80s for the last year or so, and now hope to be in a place to be able to get one! I have been driving a wrangler ( i know, I know ), the last 8 years,and have had good times with it, but now my growing family has forced me to look at something with a little more room. All my friends drive jeeps, so it would seem the obvious choice, untill 2 oct.s ago, during an annual camp trip, my friend joe ( die hard jeep guy ) pulls up in a slightly built 60. After looking at it and listening to him rave, i came home and started looking at builder 60s. A few weeks later, talking to another friend who had just returned from iceland, told me that the 80s were pretty capable as well. So again, came home and started looking....and the rest is just....well....here I am. This long drawn out story leads me to some questions. 1) of course i want lockers, but with the price for non locked being lower, is it cost effective to install arbs, is the drivetrain the same strength? I live about 20 mins from slee, just never got off my lazy bum to go talk to him, yet! I was looking for the right 95-97, ( in my old age, the creature comforts are starting to look appealing ). My plan is to put a 4" lift, with 35s and some 4.88s in, plus all the bumpers and protection. So any opinions and ideas would be great. 2) Do you think the Broncos can....
:cheers: Thanks all, this is a very clean and well informed site, and I'm glad I found it!
 
:flipoff2: /2 since I'm a noob as well.

You will love this place. Just picked up a FJ80 myself and spent the weekend working on it. All with info picked up here.

Next weekend (and some during the week) doing the same thing.

Check for club in your local area as well, the day I bought my Cruiser I posted here, found a local club (Copper State Cruiser) and just happened they had a meeting that night. Went and met them and got some more great info and met some good people I'm sure I will be seeing again.

Good luck to you,

Andrew
 
Last edited:
Well, no one else has come up with answers, so I'll do what I can.
First, I'll play with the locker question. Only a limited number were imported with factory lockers, and my brothers and I are hogging up three of them! That may not be fair!
I have been to some interesting places and I have found out about lockers. Some of the knowledge comes from the experience of others on this board, and some is my own. First, lockers are useless on ice (my own experience). They cause tires to slide when an open diff would allow at least one tire to grip. They are excellent on rock or loose soil, especially when one wheel is airborn! I first wheeled my 80 with a 3" lift and dryrotted stock tires. The rear locker was priceless.
I have rarely used the front locker, for a simple reason. The front axles are not as strong as the rears, because they steer. Use of the front locker invites breakage of the birf joint, which makes the truck two-wheel drive. It is best to limit front locker use to situations with nearly straight steering.
If your truck has no factory lockers, the addition of a rear locker will improve its abilities a lot. A front locker has a limited usefulness. I would not remove mine, nor would I pay large dollars to put one in. The selection of a locker brand or type is subject to the experience of other members on this board. As I have factory ones, I have no opinion as to the quality or useability of aftermarket units. From listening to other guys, it seems that the air operated ones are subject to air leaks but they do provide an air compressor to fill tires back up to highway pressures after airing down for trail use. A single compressor for dual use doesn't seem like a bad idea to me.
As to tires, the 315 Nitto Terra Grappler is popular here. They are not too costly and the sidewalls do not get cut often. They are rather sturdy, and highway manners are acceptable. I discovered last winter that they don't like ice much, although I blame most of that on the large size. When aired down, ice handling was acceptable. This is the equal of a 31" tire on a 4-Runner or Montero. It is the largest that can be used well without regearing.
The Nitto grabs terra rather well, even when I don't lower the pressure, and when I do I don't worry about cutting the sidewalls.
Any further questions?
 
Also i believe if you look around youll find the Lockers do not really add any additional cost to the purchase of the vehicle as much as it limits your options of available trucks. In fact, most folks will not even know what your talking about. As to drivetrain strength, the fitting of factory lockers requires the ring gear to be slightly thinner, but this is commonly thought NOT to be a problem till you get above 35's or if you really like the pedal on the right.

Oh 20 min from slee??? ..l.. if you cant get that far, be sure to check out his site for great info on the differences b/w LC models and years as well as loads of info in the FAQ section here in 80's tech.
 
welcome! :flipoff2:

You have a very high density of cruiserheads in your backyard.... living in the Denver area, so I'd look into finding out when the clubs meet and get a chance to look at some 80s and talk to the owners.

You can always add lockers, although it is convenient to buy one with them already in place.

Slee can build you anything you need!! (just bring a checkbook)

read through the FAQs above - it has everything you need to know...


m.
 
Another Dang Newbie? Another Dang Welcome to Mud. :flipoff2:

20 minutes from Slee deserves another :flipoff2:
 
Back
Top Bottom