Another cam shaft ? real time

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 8, 2004
Threads
45
Messages
1,044
Location
Houston, Texas
How do you seperate the intake cam shaft drive gear from the actual cam shaft itself? Doug's video shows the gear remaining behind even after the head is removed. It figures I'd get stumped this close to removing the head :o

Buck Buchanan
 
Got it done. I had ziptied the chain to the sprocket and that just didn't give me the wiggle room I needed.

Thanks for calling Onur, you've been a big help.

Buck
 
Heh, glad you got it figured out - just found this. Do you have the hood off, or are you working with limited headroom? You're on the home stretch and you'll be fondling those head bolts before long..

DougM
 
I started on the head bolts and realized the only 12pt #12 I have is in a 1/2 inch. No problem except the only 1/2 inch extension I have is to tall for the back two head bolts. I feel another trip to Sears comin on.

Buck
 
Yes, the hood is off.
 
Sponge most of the oil out of the camshaft area so when you're moving the head off the engine you don't spill/drip all the way to the bench. So, if you have a 1/2" wobble you might be able to get the rear bolts out, eh? Wouldn't use that to put them IN, but to get things apart and have the head on the workbench before you finish for the day I'd go for it.

DougM
 
Back
Top Bottom