An Intro and a small question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 29, 2016
Threads
15
Messages
264
Location
Giza, Egypt
Hello Fellow Cruiser'ians,

I am a new member from Egypt and a proud single owner of a 1997 TLC GX-R that is 448,000 km's strong. 5-speed Stick shift, carburetor, free locking hubs, OME front & back suspension, Dual AC, ARB Bull Bar, ARB Aluminum roof rack, Light Force Head Beams, ARB air compressor CKMA 12, Ramsey RE8000 winch, BFG 285/75R16, modified 100 Liter Coleman Cooler to operate on a Solar Powered Isotherm ASU Compressor providing up to 10 hours free sunlight cooling/freezing. Hand made fold-able shade tarp 3.5x5 meters, Long Ranger 166 fuel tank instead of stock 50 liter sub-tank, GPS, music (of-course) via hand made Bazooka speakers for the rear. All in all I can carry enough food, fuel & water to stay off the grid in the desert for up to 4 weeks. That is besides aluminum sand mats, stoves and all the bells and whistles for camping. I am posting a few pics of my rig :)

My question is, the back door plastic handle that opens the door from the outside just snapped yesterday, Toyota dealership cannot give me a part number and I can not locate the needed part number from the spare parts manual I have. Would anyone of you guys have this part number ? I can send a few pics of the broken part if it would help.

Thanks a zillion,
Marwanium aka "The Rare Element"
1997 TLC GX-R 4500 cc

IMG_3396.webp


IMG_3397.webp


IMG_3399.webp
 
I don't have your part number but I would say that you have a very nice landcruiser.
 
Thank you Tom, the other problem is that I have the "Child Safety" lock on, so I cant even open it from the inside :sour:
 
Tkx for the diagram Jdayment, but this seems to be just the "Snap" of the door handle, is it really the plastic handle that that this part refers to ? I found this part earlier but was a bit hesitant to order it online as I wasn;'t sure if this is the black plastic handle outside the vehicle or just a linkage/component of the locking mechanism inside the back door.
 
I believe it is the outside portion handle what appears in the diagrams are not always the best depiction of part appearance. It is the closest part I could find anything else that would be similar. If that model of Landcruiser isn't common in Egypt I would look at contacting PartSouq Auto Parts Around the World they are based in UAE and barn doors are common there. I know when I lived in Mali barn doors were common as well but I have never been to Egypt. Some guys from Australia might be able to chime in as well.
 
I did contact PartSouq and emails back & forth since yesterday. Pictures were sent upon their request, they sent them to the dealer and that is the response received from Toyota via PartSouq !! Thery said they are "help-less"

Please find below reply from TOYOTA MOTOR CORPORATION Japan.
===========================================================

Dear Tenil-san,
In reply to your inquiry, our investigation indicates as follows. (Pai30229437)

Your inquired part was not installed to your subject vehicle when shipped from the manufacturing plant. And originally, PNC.75442A(75442-60060, "GX" was installed at the your indicated position. Please refer to the attachment. Therefore, we presume that your indicated part was installed from market, so unfortunately, we can't investigate the P/N of your OE part.

For your reference, J-TACS does not handled this part because J-TACS was established in 2002.

*Your subject vehicle is a gray imported vehicle.

Rather very strange since nothing was ever modified in my TLC !!
Mali..........wow ! :)
 
I am willing to take a few gambles as an opportunity arose for a rather intense desert trip in 8 days and I need to fix that part ASAP. Stupid me, had the "child Safety" on so I can't even open the door from the inside :mad:
LCPhil, I'll try to work on opening the door from the outside without the handle and see if it can be done. It seems the trick now is to open the door first, then try to epoxy the broken part or try to do a homemade handle for the time being. I guess whether it is a US, Aussie or Gulf model, these handles should all be the same !
Thanks guys for your support..........
 
Do US Land Cruisers have the needed attachment point to bolt on barn doors if someone in the US was able to get a set?

I think this has been discussed before I am sure it is doable probably need to weld in some supports for the hinges similar to the factory side steps that go up the rear pillars. I almost would prefer barn doors in some cases over the lift and tail gate alot of things you can do with a barn door.

For Sale: - 80 barn doors
 
I am willing to take a few gambles as an opportunity arose for a rather intense desert trip in 8 days and I need to fix that part ASAP. Stupid me, had the "child Safety" on so I can't even open the door from the inside :mad:
LCPhil, I'll try to work on opening the door from the outside without the handle and see if it can be done. It seems the trick now is to open the door first, then try to epoxy the broken part or try to do a homemade handle for the time being. I guess whether it is a US, Aussie or Gulf model, these handles should all be the same !
Thanks guys for your support..........

Nice set up, what size is your spare?
 
Last edited:
Back
Top Bottom