Aluminum quarter panel devalueing ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 7, 2005
Threads
288
Messages
4,857
Location
Columbia, SC
If someone had a nice 82' FJ40 that was all stock with nice tires and aftermarket rims, and the PO repaired the rear rusty quarter panels by riveting on aluminum skins to the body and then painting the whole cruiser with non original paint, how much less desireable would this cruiser be? It is currently in such a nice condition that one could drive it as a daily driver. Not spring over with the hard top on. Could this cruiser possibly sell for $10,000 or is it worth more like $6,000 because of the rear quarter graffing?

Sorry I don't have any pictures, I saw it on last minutes notice and didn't have my camera. If anyone else is interested it is in Myrtle Beach. It will be really hard to see this cruiser unless someon is REALLY interested. It is locked in a wharehouse, along with numerous other 4x4 projects and the guy is really hard to track down to look at it.


Jeremy
 
Whatever YOU are willing to pay and HE/SHE is willing to accept. There is no definitive answer. 'Nice' is just too subjective of a term. End of story plus
worthless_thread_wo_pics.gif
 
... the PO repaired the rear rusty quarter panels by riveting on aluminum skins to the body and then painting the whole cruiser with non original paint,...


Is this to say that this "repair" is basically an aluminum skin covering the cancer???? Not cut out???

As you've already noted, pics go a long way but I'd think that for 10K it'd have to be pretty darn nice with little needing to be done or that you wanted one really really bad.

...and someone will say below, "...depends upon what you're looking for" (Although only people from Louisiana will end their sentence w/ a preposition.)

I don't think that the aluminum itself is a deal breaker but I would have probably paid more for cut out steel and replaced w/ steel original paint etc..


...don't feel too bad though, I paid too much for mine probably.

Good luck and post up some pics.. get him to send you some.

Scott
 
oops...nevermind... he beat me too it!

Good luck
Scott
 
Wow D, that was pretty harsh. For a second I had to check and see if I posted in Pirate by mistake.

Thanks, I guess I will just have to see if it is worth it to me, I was thinking more in terms of resale value, if because the rear quarters are molested if this is a sure fire way to scare off people that are wanting to spend over $10,000 for an 81'+ FJ40. I was going to drive this myself for about a year and make sure everything works well and then sell it.

Thanks Scott. Yes it is an aluminum skin covering the quarter panel. Seems really thin. My guess, without removing it and thus having to repaint the rig, is that all the spot welds around the wheel well and up to the door opening is rusted. I guess if this much body is rusted, there probably are more rust issues hiding under fresh paint. The guy said this rig came from the Outerbanks of NC. I think I will pass unless I can inspect it better in daylight and maybe if I can get him down a little.

Jeremy
 
Last edited:
Back
Top Bottom