Aisan SD-40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 1, 2004
Threads
107
Messages
474
Location
Phoenix, AZ
Looking for the Main Nozzle for a Aisan SD-40 carb. Item #3 in the diagram. Btw, this was a carb I bought years ago and finally got around to getting it rebuilt.

Screenshot_20210518-092304_Chrome.jpg
 
Robert

is this the same carburetor that had a fuel filter threaded into the fuel inlet?

If so, perhaps it’s time to move on.
 
Not that I recall. I do recall putting a kit in it years ago, but it never ran. I just put the original carb back on. It never occured to be that any internal part was missing.

20210518_142927.webp


20210518_142909.webp


20210518_142900.webp


20210518_142833.webp


20210518_142813.webp
 
Something I've noticed though is on this carb the Main Nozzle can be accessed by removing the plug on the left side of the carb. Later models it appears it is routed towards the float bowl or plunger.

Robert
 
Back
Top Bottom