Air Pump bypass methods for $0?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Eicca

Professional Noob
Joined
Apr 26, 2009
Threads
229
Messages
2,456
Location
Utah
So according to this thread, a nice performance/mpg increase can be achieved by blocking the EGR and bypassing the pump.

I've already blocked the EGR. Now for the pump. Don't want to spend money on a bypass belt; can I simply plug up the pump hoses?

Or, depending on how the air pump works, can I loop the two hoses coming off it to each other?

Thanks!

P.S. the EGR disabling is a no-brainer! Harmless easy and gave my truck more power!
 
There's a couple of threads on desmogging a 3FE, if you search around a bit.
 
Sure. Disconnect the air pump hose.

FWIW, if you're doing this for emissions as well, it won't do a thing. I have access to the smog check stuff and checked mine with and without the air pump connected, and it didn't do any better. Or worse, for that matter.

YMMV.
 
Okay, so I can just pull the hoses off without adverse effects, correct? No strange gasses leaking into my engine compartment? Would it be wise to cap them?
 
The big hose leading from the intake to the air pump, that's the one I disconnected. Made no difference. I'd cap it.
 
Pretty much. Disconnect the other hose on the pump, too, I forgot to mention..
 
Where does the other hose actually do under the intake? Im still not certain I found the purpose of the smog pump. Wish it was a turbo..
 
FWIW I've been running without my smog pump for years. Or course my mod wasn't $0. Once I had it removed I had no choice other than to instal a complete on board air solution.

Truck passes NJ smog with flying colors every time. I didn't really remove any hoses, just the smog pump. The intake for the smog pump is a direct run from the air cleaner and I picked that up for the intake on the york. All smog equipment is still there and intact in case they do a visual inspection.
 
Got mine bypassed. And by "bypassed" I mean pulled the hoses and capped them with quarters and electrical tape. Added a tiny bit more torque on top of what I got from blocking the EGR.
 
Off to wally world. Did you cap them with quarters and hook the hoses back up? or did that not fit. Im thinking about doing this while the exhaust cools. I have other exhaust problems right now which require me to purchase a small impact gun :D
 
I lashed them to another hose in there with some wire so they don't flop around. If you use this method make sure they don't touch anything hot.
 
Back
Top Bottom