After Market steering colum

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 15, 2006
Threads
19
Messages
39
I would like to replace my current swaped in colum with either a original colum or a after market tilt colum. my FJ40 is a 1972. I guess my question is two fold

1) can I use a original colum with power steering

2) Can anyone suggest an after market tilt colum
 
I have a 79 ford tilt that came from an F150 I plan on putting in mine since I had it laying around. Same length as the 76 LC column I had for the power steering conversion I plan on doing on my 71. I am sure you could get a chevy column like all the hot rodders use as well. Just measure the column you have and with some possible mods it should work. The nice part about a Chebbie column is if you plan on using an after market wiring harness, most come with the chevy column adapter as part of the kit. I just went to the local pick and pull and grabbed the correct harness part out of an old FOrd and will wire the new harness into that.

Try here : http://www.progressiveautomotive.com/progressiveautomotive.com/ididit5557Chevy.htm
or here : http://www.rjays.com/Flaming_River/55-56-57-tilt-columns-01.htm

Try ebay or Craigslist. :cheers:

BTW - a stock column will work with power steering, run a search and check tech and you will find more than you need.
 
I would suggest looking in the summit catalog, good toilet reading material :eek: . They have a steering column with tilt that should mount into the FJ. Advanced adapters also sells a column mounting plate that will work with an aftermarket steering column assembally.

UNO
 
enj0ii, ball park $$$ for yours if you don't mind????

Post the pics of the column you get...
Was thinking of the same thing.
Good luck

Bx
 
You can use the original too if you want the stock look. Of course the original steering wheel is big enough for a bus. :grinpimp:
 
Friend of mine has JT's tilt column, I think it's an aftermarket hot rod piece they order out. Looks good, works good, shipping took quite a while. His truck is a frame off restored 67 with mini ps.
 
Before weighing in on column choice, I would want to know what provisions you have made for your turn signals at this point. Wiring turn signals IS part of the column equation IMO.
 
On the JT column, turn switch is included, just a matter of crossing over the wiring diagrams. Should be pretty simple with any column, just find the power in and out for each signal.
 
Back
Top Bottom