AC vacuum pump

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2003
Threads
106
Messages
1,018
Location
Silicon Valley
I doubt its worth it.If cost is an issue, go to Habor Freight at least you can return it if its no good . My vac. pump cost 250.00 buy itself. 2 cents Mike
 
I would like to avoid the junk where it's more trouble than it worths. What should I look for a good quality pump? I see some pump are rated at 200 microns for 100 bucks, another for $250 at 40 microns.

Please educate me. Thanks.
 
Most vacuum pumps I'm familiar with are rated by cfm and microns. Smaller micron #'s are better, and bigger cfm #'s are better. Our 2.5 cfm (50 micron) sells for $105 and is a good pump for the weekend mechanic. Unless you plan on doing lots of A/C work, the 2.5 cfm will work just fine.
I would avoid the cheap, small vacuum pumps that operate off shop air-they take forever and don't pull a deep vacuum.
Hope this helps,
Rex
 
The gauge set looks just like what I bought from Harbor Freight for $50. The sell a 2.5 cfm electric vacuum pump for $80. They have some cheap thermometers that also help diagnosing AC systems.
 
Most vacuum pumps I'm familiar with are rated by cfm and microns. Smaller micron #'s are better, and bigger cfm #'s are better. Our 2.5 cfm (50 micron) sells for $105 and is a good pump for the weekend mechanic.
Rex

I think your vacuum pump will fit my bill, may I ask the brand and model for that pump?

Thanks very much. It's very nice to hear from an AC professional !!!
 
It's a Santech #MT1401. This link will get you a real poor quality image, along with some of their other products:

Santech Industries, Inc. - Automotive Air Conditioning Service Parts

It comes with oil, and weighs about 28 lbs. I can get you a shipping quote if you give me a zip code. Don't hesitate to contact me if you have more questions.
Thanks,
Rex
 
To do this on the cheap, convert an old refrigerator or freezer compressor. Look it up on the net. You can even use a chambers and evacuate it with the system, then re-valve the discharge to the evacuated chamber and continue to draw down the ac system to appropriate levels.
Chris
 
Hi guys,

I need an AC vacuum pump, can you recommend one that is priced reasonable yet reliable enough for mulitple future usage?

Anyone experienced with this kit:

AC A/C Manifold Gauge Set R134 R134A + VACUUM PUMP NEW:eBay Motors (item 280347018016 end time Jul-16-09 15:14:29 PDT)

I'm opened for suggestions and rather pay a little bit more but get something accurate and reliable.

Thanks.

I haven't read the entire thread but that vacuum pump is not worth the money long term.

I bought a manifold gauge set and a Robinaire vacuum pump, all used from a tool store. Lots of these things are turning up due to the economy in used tool stores and pawn shops. A good quality vacuum pump is essential for A/C work, IMHO.

Good luck.
 
cheap @ harbour frieght

i bought the gauhes and the vac pump at harbour frieght for under 130.00 and ive used it 3 times works great for the money,they have a pump for under 30 that you hook up to ur compressor i was a lil skeptical about it but my cousin bought that one and says he has used it dozens of times with great success,auto zone will loan you both also
 
Unfortunately - only some AutoZones carry these tools. Mine did not.
 
Back
Top Bottom